Bedienungsanleitung Powerplus POW60476 (Seite 9 von 14) (Englisch)

480881

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

POW60476 EN

9.8.1 Cutting string extension

Your unit is equipped with an automatic tapping dual string mechanism, i.e. both strings will

become extended when you tap the ground with the cutting attachment. If the strings are

initially longer than the given cutting diameter, the line cutting blade will automatically adjust

their length. Attention! Regularly remove dirt from the line cutting blade. Otherwise, its cutting

effect will be limited.

In case of a decreasing cutting performance:

Start the engine and hold the unit above grass. Hit the ground with the cutting attachment. The

string will extend itself automatically.

 In case it becomes impossible to extend the string:

 Turn the unit off

 Properly insert the spindle and strongly pull the string end.

 In case you do not see the string tips:

 Change the string spindle.

9.9 Work with the metal cutting blade

Attention! During your work always wear the belt and suitable work clothes. Make sure the

cutting blade is properly mounted. Damaged and blunted unit components must be replaced.

There is a risk of injury.

 Use the cutting blade on free and flat surfaces. Carefully check all the areas to be treated

and remove all the foreign objects. Avoid any contact with stones, metal or other

obstacles. The metal cutting disk could become damaged and there is also a risk of

kicking.

 During your work, hold the cutting attachment close above the ground and move the unit

like a regular scythe from side to side.

 Do not hold the cutting attachment under any angle and do not lift it above the ground.

 Do not use the unit for the cutting of shrubs, brushwood or underwood.

 Regularly check the metal cutting blade's condition and change damaged cutting blades.

10 CLEANING AND MAINTENANCE

ATTENTION! Let any repair and maintenance work not described in these

instructions be carried out by a professional service shop. Only use

original replacement parts. Any maintenance and cleaning tasks should

only be carried out when the motor is switched off and the ignition

disconnected. Risk of injury! Let the machine cool down before undertaking

any maintenance or cleaning tasks. Parts of the motor are hot. There is a

risk of getting burned!

 This tool corresponds to the relevant safety provisions.

 Repairs, service and maintenance must be carried out exclusively by authorized service

workshops/trained professionals.

 Only original spare parts may be used for repairs; otherwise there is a risk of injury for the

operator.

10.1 Unit cleaning

Subject your unit to regular cleaning and care. It will deliver good performance for a very long

time.

 After every operation clean the cutting attachment of grass and soil.

 Clean the unit with a soft brush or a rug.

 The unit must not be sprayed with water or submerged into water.

 Do not use any detergents or cleaning solutions. The unit could be damaged. Chemical

substances could negatively affect the unit's plastic components.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW60476 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW60476

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info