Bedienungsanleitung Powerplus POW60478 (Seite 12 von 13) (Englisch)

582081

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

POW60478 EN

 Execute all the recommendations concerning maintenance specified in the "Maintenance

and care" chapter.

 Clean the engine outside surface, the shaft housing, the protective cover, and the string

attachment.

 Drain fuel from the tank.

 After fuel drainage, start the engine.

 Let the engine run at idle until it stops. Asa result of that, no fuel will remain in the

carburetor.

 Let the engine cool off (for approximately 5 minutes).

 Remove the spark plug with the spark plug key.

 Pour a little bit of 2-cycle engine oil into the combustion chamber. Pull the starter rope grip

a few times - oil will spread. Replace the spark plug.

 Store the unit in a cool and dry place, which is remote from sources of fire like oil burners,

water heaters etc.

16 RESETTING IN OPERATION

 Remove the spark plug and pull the starter rope fast, in order to remove oil from the

combustion chamber.

 Clean the sparkplug or replace it, if necessary.

 Prepare the unit for resetting in operation and fill the tank with the correct mixture of fuel

and oil (40:1).

17 WARRANTY

 This product is warranted as provided by law for a 24 -month period effective from the

date of purchase by the first user.

 This warranty covers all material or production flaws excluding : batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

 We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

 Repairs may only be carried out by an authorized customer service centre for Powerplus

tools.

 You can always obtain more information at the number 00 32 3 292 92 90.

 Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

 At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate

usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not

following the instructions given in the manual), inexpert assembly, lightning strike,

erroneous net voltage. This list is not exhaustive.

 Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

 Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

 We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon

brushes serviced regularly, etc.).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW60478 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW60478

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info