Bedienungsanleitung Powerplus POW637 (Seite 10 von 18) (Englisch)

480885

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

POW637… EN

9.3 Stopping

Release the switch lever

ATTENTION : After switching off, the cutting blade will go on turning for a

few seconds, make sure the blade has come to a complete standstill.

CAUTION: Do not rapidly switch off and on.

9.4 Safety button

Important! To prevent the machine switching on accidentally, the lawn mower is equipped with

a safety lock-off which must be pressed before the switching bar can be activated. The lawn

mower switches itself off when the switch is released.

Repeat this process several times so that you are sure that the machine functions properly.

Before you perform any repair or maintenance work on the machine, ensure that the blade is

not rotating and that the power supply is disconnected.

Important! Never open the discharge flap if the grass bag is being emptied

and the motor is still running. The rotating blade can cause serious injuries.

Always secure the discharge flap and grass bag carefully. Always switch off the motor before

you remove these items. The safety distance between the blade casing and the user provided

by the guide struts must be maintained at all times.

9.5 Information on correct mowing

We recommend that you mow in overlapping lines. Only mow with sharp, perfect blades so

that the blades of grass do not fray, making the lawn turn yellow.

The cutting height should be between 4 and 6 cm and the growth before the next cut should

be between 4 and 5 cm. If the lawn grows longer than this on occasion, do not make the

mistake of cutting to normal length straight away since this will damage the lawn. Never cut

the grass by more than half its height. Keep the underside of the mower casing clean and

remove all grass deposits from it. Deposits make it more difficult to start the mower and also

adversely affect the mowing quality and the grass discharge. On slopes mow across the slope

(not in up or down direction).You can counteract the tendency of the mower to slide down the

slope by setting it at an angle upwards. Select the cutting height to suit the actual length of the

grass. Make several passes to ensure that you do not remove more than 4 cm of grass length

in any one pass.

Switch off the motor before you carry out any inspections of the blade. Remember than the

blade will continue to turn for a few seconds after the motor has been switched off. Never

attempt to stop the blade.

Check regularly that the blade is correctly secured, in good condition and well ground. If not,

grind or replace the blade. If the moving blade strikes an object, stop the mower and wait until

the blade has come to a complete standstill. Then check the condition of the blade and the

blade holder. If they are damaged, they must be replaced.

Place the mains lead in loops on the ground in front of the socket. Mow away from the socket

and cable and ensure that the mains lead is always on the section of lawn that you have

already mowed so that you do not run over the mains lead with the mower. As soon as you

see mown grass on the lawn whilst you are mowing, the grass bag will need emptying.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW637 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW637

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info