Bedienungsanleitung Powerplus POW6451 (Seite 7 von 14) (Englisch)

480896

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

POW6451 EN

 If the shredder should start to vibrate abnormally, switch off the motor and check for the

cause immediately. Vibration is generally a warning of trouble.

 Ensure blades are secure before shredding. Do not operate the shredder if any of the

blades are not properly mounted.

 The shredder should be checked carefully before use. You should only work with a

shredder that is in good condition. If you notice any defect on the machine that may cause

danger to the operator, do not operate the shredder until defects are rectified.

 Replace worn or damaged parts for safety. Use only original spare parts. Parts not

produced by manufacturer may cause poor fit and possible injury.

 Use the shredder only in places where it is protected from water and never use it outdoors

in rainy weather.

 Store in a dry secure place out of reach of children,

 This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

 Children should be supervised to ensure that they do not play with the appliance.

6.1 Preparation:

 Do not allow children to operate this equipment

 Do not operate this equipment in the vicinity of bystanders

 Wear ear protection and safety glasses at all times while operating

 Avoid wearing clothing that is loose fitting or that has hanging cords and ties

 Only operate the machine the machine in open space (e.g. Not close to a wall or other

fixed objects) and on a firm, level surface

 Do not operate the machine on a paved or gravel surface, where ejected material could

cause injury

 Before starting the machine, check that all screws, nuts, bolts, and other fasteners are

properly secured and that guards and screens are in place. Replace damaged and

unreadable labels

6.2 Operation:

 Before starting the machine, look into the feeding chamber to make certain, that it is empty

 Keep your face and body away from the feed intake opening

 Do not allow hands or any other part of the body or clothing inside the feeding chamber,

discharge chute, or near any moving part

 Keep proper balance and footing at all times. Do not overreach. Never stand at a higher

level than the base of the machine, when feeding material into it

 Always stand clear of the discharge zone when operating this machine

 When feeding material into the machine be extremely careful that pieces of metal, rocks,

bottles, cans or other foreign objects are not included

 If the cutting mechanism strikes any foreign objects or if the machine should start making

any unusual noise or vibration, shut off the power source and allow the machine to stop,

disconnect the spark plug wire from the spark plug ( electric unit disconnect from supply)

and take the following steps:

1. Inspect for damage

2. Check for and tighten any loose parts

3. Have any damaged parts replaced or repaired with parts having equivalent specifications

 Do not allow processed material to build up in the discharge zone; this may prevent proper

discharge and can result kickback of material through the feed intake opening

 If the machine becomes clogged, shut of the power source and disconnect the spark plug

wire from the spark plug (electric unit disconnect from supply) before clearing debris. Keep

the power source clear of debris and other accumulations to prevent damage to the power

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW6451 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW6451

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info