Bedienungsanleitung Powerplus POW67904 (Seite 6 von 8) (Englisch)

582185

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POW67904 EN

11 TROUBLESHOOTING

Incidents

Causes

Remedies

Pump does not start

- No mains supply

- Floater does not

switch

- Check mains supply

- Bring floater in a higher

position

No flow

- Inlet sieve is clogged

- Pressure hose in

bent

- Clean inlet sieve water

jet

- Reset hose

Pump does not switch off

- Floater cannot sink down

- Place pump properly on shaft

ground

Insufficient flow

- Inlet sieve is clogged

- Reduced pumping

capacity by dirty and abrasive

water

- Clean inlet sieve

- Clean pump and replace

worn-out parts

Pump switches off after

short operating period

- Thermal cutout stops

pumps due to dirty water

- Water too hot.

Thermal-cutout stops pump

- Remove mains plug.

Clean pump and shaft

- Make sure that a water

temperature of max. 35°C is not

exceed

12 STORAGE

 Thoroughly clean the whole machine and its accessories.

 Store it out of the reach of children, in a stable and secure position, in a cool and dry

place, avoid too high and too low temperatures.

 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

 Don’t keep it in plastic bags to avoid humidity build-up.

13 WARRANTY

 This product is warranted as provided by law for a 24 -month period effective from the

date of purchase by the first user.

 This warranty covers all material or production flaws excluding: batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

 We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

 Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

 You can always obtain more information at the number 00 32 3 292 92 90.

 Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

 At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate

usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not

following the instructions given in the manual), inexpert assembly, lightning strike,

erroneus net voltage. This list is not exhaustive.

 Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW67904 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW67904

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info