Bedienungsanleitung Powerplus POW7490 (Seite 5 von 10) (Englisch)

481001

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

POW7490 EN

5.4 Power tool use and care

 Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

 Do not use the power tool if the switch cannot turn it on and off. A power tool with a

broken switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any

other feature that might affect the operation of the power tool. If it is damaged, the power

tool must be repaired. Many accidents are caused by using poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to jam and are easier to control.

 Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Service

 Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR TILE CUTTERS

 Make sure that the cutting disc is correctly screened by the guard.

 Never remove the riving knife. The distance between the cutting disc and the riving knife

should not exceed 5 mm.

 Do not use cutting discs which are bent, deformed or otherwise damaged.

 Do not use cutting discs which do not comply with the specifications stated in this manual.

 Never start cutting tiles before the machine reaches full speed.

 Never attempt to cut extremely small workpieces.

 Do not leave the work area until the machine has been switched off and the cutting disc

has come to a complete standstill.

 Never attempt to stop the cutting disc by exerting pressure on the side of the disc.

 Always unplug the machine before performing any maintenance.

 Do not use the machine before it has been completely assembled and installed according

to the instructions.

 Do not perform any design, assembly or Construction activities on the table while the

machine is switched on.

 Unplug the machine and clean the table before leaving the work area.

6.1 Power supply

 This tile saw must be connected to an earthed 230V - 50Hz power source.

 This power source must be secured by a 16A fuse.

 Your machine is supplied with a 30mA residual current device to protect the user against

electric shock.

 It can only protect you when the power mains to which the tool is plugged is properly

grounded.

 Have the proper outlet installed by a qualified electrician.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW7490 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW7490

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info