Bedienungsanleitung Powerplus POW8136 (Seite 6 von 12) (Englisch)

481011

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

POW8136 EN

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

6.5 Service

 Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS

 Warning! The laser beam potentially causes severe eye damage. Never look or stare

directly into the laser beam.

 During use, do not point the laser beam at people, directly or indirectly through reflecting

surfaces.

 This laser complies with class 2 according to EN 60825-1:2001. The unit includes no

servicing components. Do not open the housing for any reason. If the unit is damaged,

have the damage repaired by an authorized repair agent.

8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES

 When replacing batteries, always replace the complete set. Do not mix old batteries with

new ones.

 Prevent removed batteries from short circuiting.

 Do not store batteries where the temperature may rise above 50 °C, e.g. in a car which

has been parked in the sun.

 Do not burn batteries.

 Never attempt to open batteries.

 In case of battery leakage, carefully remove the liquid using a cloth. Avoid skin or eye

contact. Do not swallow. In case of skin or eye contact, rinse abundantly for 10 minutes

with clean water and consult a physician.

9 ASSEMBLY

9.1 Before putting the machine into operation

 The machine must be firmly mounted in working position, e.g. on a workbench, the base

frame supplied with the machine, or similar.

 All the covers and safety devices have to be properly fitted before the machine is switched

on.

 It must be possible for the saw blade to run freely.

 When working with wood that has been processed before, watch out for foreign bodies

such as nails or screws etc.

 Before you actuate the On/Off switch, make sure that the saw blade is correctly fitted and

that the machine's moving parts run smoothly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POW8136 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POW8136

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info