POWC40100 EN
Copyright © 2021 VARO P a g e | 5 www.varo.com
▪ Take special care when sanding lead based paint:
− All persons entering the work area must wear a mask specially designed for protection
against lead paint dust and fumes.
− Children and pregnant women must not enter the work area.
− Do not eat, drink or smoke in the work area.
▪ Do not leave the tool running. Operate the tool only when hand-held.
▪ Ventilate your work area adequately when you perform sanding operations.
▪ Be sure that there are no cracks or breakage on the pad before use. Cracks or breakage
may cause a personal injury.
7 OPERATION
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
7.1 Switching on/off
Connect the plug to the power supply.
▪ Switch the power tool on: push the ON/OFF switch button (1) forwards onto the “I”
position.
▪ Switch the power tool off: pull the ON/OFF switch button backwards to the “O” position.
WARNING: Never use the machine for sanding magnesium work piece.
7.2 Attaching the sandpaper
▪ Open the paper clamps.
▪ Take sanding paper of the required grain size and place it on the sanding pad.
▪ Make sure that the perforation in the paper corresponds with those on the sanding pad.
▪ Fold tha sanding paper at both ends around the edges of the sanding pad.
▪ Close the paper clamps one by one.
▪ Make sure that the ends of the sanding paper are clamped.
▪ The sanding paper must be fitted firmly on the sanding pad and should not come loose.
7.3 Collecting the dust
▪ For a better dust extraction of the working surface, your sanding machine can be
connected to the ordinary vacuum cleaner for house-use.
▪ Slide the suction mouth of a vacuum cleaner onto the connection.
▪ The vacuum-cleaner connecting piece is supplied with the appliance.
8 TECHNICAL DATA
