Bedienungsanleitung Powerplus POWDP2510 (Seite 6 von 12) (Englisch)

676320

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

POWDP2510 EN

 Before switching on the tool, be sure the blade in not contacting the work piece.

 Keep hands away from moving parts and on the top surface of the work piece. Do not

place hands below work surface while saw is operating.

 Hold tool by insulated grip surface when performing an operation where the cutting tool

may contact the hidden wiring or its own cord. Contact the alive wire make exposed the

metal parts of the tool alive and shock the operator.

 Do not stare at the tool with the blade touching any surface. The blade action will bounce

the tool and may cause bodily injury.

 Always wear safety glasses or goggles, normal prescription eye or sunglasses are not

safety glasses

 Check your area for proper clearance before cutting. This will avoid cutting into your

workbench, the floor, etc.

 This product is not a toy. Keep it out of reach of children.

 People with pacemakers should consult their physician(s) before use. Electromagnetic

fields in close proximity to heart pacemaker could cause pacemaker interference or

pacemaker failure. In addition, people with pacemakers should:

 Avoid operating alone.

 Do not use with power switch locked on.

 Properly maintain and inspect to avoid electrical shock.

7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS

7.1 Batteries

 Never attempt to open for any reason.

 Do not store in locations where the temperature may exceed 40 °C.

 Charge only at ambient temperatures between 4 °C and 40 °C.

 When disposing of batteries, follow the instructions given in the section “Protecting the

environment”.

 Do not cause short circuits. If connection is made between the positive (+) and negative (-)

terminal directly or via accidental contact with metallic objects, the battery is short circuited

and an intense current will flow causing heat generation which may lead to casing rupture

or fire.

 Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators

and other polymer components may be damaged resulting in electrolyte leakage and/or

internal short circuiting leading to heat generation causing rupture or file. Moreover do not

dispose of the batteries in fire, explosion and/or intense burning may result.

 Under extreme conditions, battery leakage may occur. When you notice liquid on the

battery, proceed as follows:

 Carefully wipe the liquid off using a cloth. Avoid skin contact.

 In case of skin or eye contact, follow the instructions below:

 Immediately rinse with water. Neutralize with a mild acid such as lemon juice or

vinegar.

 In case of eye contact, rinse abundantly with clean water for at least 10 minutes.

Consult a physician.

Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do

not incinerate the battery.

7.2 Chargers

 Never attempt to charge non-rechargeable batteries.

 Have defective cords replaced immediately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWDP2510 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWDP2510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info