POWDP25400 EN
Copyright © 2021 VARO P a g e | 14 www.varo.com
▪ Remove burrs and rust as these impede the feed across the material.
▪ Thick beeswax (furniture polish) applied to the base plate of the tool makes metal cutting
easier. (the base plate will slide easier over the work piece)
▪ Only suitable for cutting brass, copper, lead, aluminium or galvanised mild steel.
▪ Every 2 minutes of metal cutting should be followed by a rest of at least 3 minutes.
12.3.2 Ceramic tiles, slates etc:
▪ Only use a blade specifically designed for this purpose.
▪ Always use with a suitable vacuum cleaner or dust extractor connected as the dust can be
hazardous to the operator and prevent the guard operating correctly.
12.3.3 Plasterboard:
▪ Only use a blade specifically designed for this purpose.
▪ The plunge saw is only recommended for making occasional cut outs in plasterboard and
always us it with a suitable vacuum cleaner or dust extractor connected. The dust can
prevent the guard operating correctly.
▪ Conventional tools such as keyhole saws or knives generally give excellent results, though
the plunge saw can be used if a particularly neat, dust free cut is required or if there is a
danger of cutting pipes or cables.
13 WORKING HINTS FOR MINI PLUNGE SAW
Always use a blade suited to the material and material thickness to be cut. The quality of cut
will improve as the number of blade teeth increase. Always ensure the work-piece is firmly
held or clamped to prevent movement. Support large panels close to the cut line. Any
movement of the material may affect the quality of the cut. The blade cuts on the upward
stroke and may chip the uppermost surface or edges of your work piece when cutting, ensure
your uppermost surface is a non-visible surface when your work is finished.
14 MAINTENACE
Remove the battery pack from the tool before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user
serviceable parts in your power tool. Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal and will not damage your power tool.
15 TECHNICAL DETAILS
