POWDP77100 EN
Copyright © 2022 VARO P a g e | 6 www.varo.com
▪ When saw blades have to be mounted on the thread of the spindle, make sure that the
spindle has sufficient thread
▪ Make sure that the saw blade has been mounted and fastened properly. Do not use
reducing rings or adapters to make the saw blade fit properly.
▪ Apply the machine to the work piece only when the machine is switched on.
▪ When working with the machine always hold the machine firmly with both hands and
provide for secure distance.
▪ Persons under 16 years of age are not permitted to operate this machine.
▪ Always wear safety goggles and hearing protection. If desired or required also use another
protection for example an apron or helmet
▪ Always disconnect the plug from the socket before carrying out any work on the machine,
only plug in when the machine is switched off
▪ Keep mains lead clear from working range of the machine. Always lead the cable away
behind you.
▪ The base plate must not be clamped down while the blade is extended. Lowering and
raising the blade must be a smooth operation.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND
CHARGERS
7.1 Batteries
▪ Never attempt to open for any reason.
▪ Do not store in locations where the temperature may exceed 40 °C.
▪ Charge only at ambient temperatures between 4 °C and 40 °C.
▪ Store your batteries in a cool dry place (5 °C-20 °C). Never store batteries in discharged
state.
▪ It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a
year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity.
▪ When disposing of batteries, follow the instructions given in the section “Protecting the
environment”.
▪ Do not cause short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short circuited
and an intense current will flow causing heat generation which may lead to casing rupture
or fire.
▪ Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged resulting in electrolyte leakage and/or
internal short circuiting leading to heat generation causing rupture or file. Moreover do not
dispose of the batteries in fire, explosion and/or intense burning may result.
▪ Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
− Carefully wipe the liquid off using a cloth. Avoid skin contact.
− In case of skin or eye contact, follow the instructions below:
✓ Immediately rinse with water. Neutralize with a mild acid such as lemon juice or
vinegar.
✓ In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do
not incinerate the battery.
7.2 Chargers
▪ Never attempt to charge non-rechargeable batteries.
