POWDPG75561 EN
Copyright © 2022 VARO P a g e | 9 www.varo.com
Note: if the battery does not fit properly, disconnect it and confirm that the
battery pack is the correct model for this charger as shown on the
specification chart. Do not charge any other battery pack or any battery
pack that does not securely fit the charger.
▪ Frequently monitor the charger and battery pack while connected.
▪ Unplug the charger and disconnect it from the battery pack when finished.
▪ Allow the battery pack to cool completely before using it.
▪ Store the charger and battery pack indoors, out of reach of children.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down
to room temperature before charging. This will extend the life of your
batteries.
8.2 Insertion of battery (Fig. A & B)
WARNING Always remove battery pack (12) and key (2) from your tool when
you are assembling parts, making adjustments, cleaning, or when not in
use. Removing battery pack and key will prevent accidental starting that
could cause serious personal injury.
▪ Raise the battery cover (7).
▪ Place the battery pack (12) in the mower.
▪ Align raised ribs on battery pack with grooves in the mower’s battery port.
▪ Push down into battery compartment until the battery clicks into place.
▪ Lower the battery cover.
WARNING Make sure the latch on the top of the battery pack snaps in place
and the battery pack is fully seated and secure in the mower’s battery port
before beginning operation. Failure to securely seat the battery pack could
cause the battery pack to fall out, resulting in serious personal injury.
8.3 To remove battery pack (Fig. A & B)
▪ Raise the battery cover (7).
▪ Press and hold the battery latch button (13) at the top of the battery pack.
▪ Remove battery pack from the mower.
WARNING: To avoid serious personal injury, always remove the battery
pack and key when carrying or transporting the tool.
8.4 Battery capacity indicators (Fig. A)
▪ There are battery capacity indicators (16) on the battery pack, you can check the capacity
status of the battery if you squeeze the button (17). Before using the machine, please
press switch trigger to check if the battery is full enough for properly working.
▪ Those 3 LED’s show the status of the capacity level of the battery:
▪ 3 LED’s are litt: Battery fully charged.
▪ 2 LED’s are litt: Battery 60% charged.
▪ 1 LED is litt: Battery almost discharged.
