Bedienungsanleitung Powerplus POWE10060 (Seite 5 von 9) (Englisch)

675174

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

POWE10060 EN

 Make sure of your footing on ladders and scaffolding when drilling free-handed.

 Use a line detector to localize lines in walls with concealed electric, water or gas lines.

Avoid touching live components or conductors.

 Wear ear muffs to protect your hearing. Loss of hearing can be a gradual process!

 Wear goggles and use a dust mask on jobs generating dust.

 Do not use in areas where there are vapours or flammable liquids.

 Always pull the plug out of the socket before cleaning or making changes to the machine.

 Protect the power cable from damage. Oil and acid can damage the cable.

 Never overload the machine.

 Secure all workpieces sufficiently.

 Important! It is imperative to follow all national safety regulations concerning installation,

operation and maintenance.

 Chisel bits and drill bits may be flung out of the machine accidentally and cause serious

injury:

 Before starting to work, always check that the chisel or drill bit is property locked in the

chuck.

 Examine the chuck regularly for signs of wear or damage.

 Never start up a hammer tool until it pressed against a workpiece (wall, ceiling, etc.).

 When you are finished, unplug the hammer drill from the electric supply and remove the

chisel or drill bit Irom the machine.

 Always disconnect the hammer drill Irom the electric supply before you change a chisel or

drill bit.

 Protect your eyes and other workers from flying particles and splinters. Wear a helmet! Set

up partition walls!

 Wear work gloves to protect fingers from bruising and grazing.

 Vibrations can injure the hand-arm system. Keep exposure to vibrations as short as

possible.

 Always lead the mains cable away backwards from the device.

 Store the device where it is inaccessible to children.

 When carrying out work, always hold the device with both hands and ensure that you have

a stable standing position.

7 BEFORE USING THE TOOL FOR THE FIRST TIME

 Examine the place where the device is to be used for hidden electrical cables, gas and

water pipes using a pipe finding device.

 Before connecting to !he mains, ensure care that the mains voltage corresponds to the

details on the rating plate.

7.1 Fitting and changing tools (Fig. 2)

The device is equipped with a SDS-plus attachment system.

 Clean tools and grease with a thin layer of machine grease before fitting.

 Pull back fastening sleeve and hold.

 Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock

automatically.

 Check that it has locked by pulling the tool

7.2 Removing SDS-plus tool

Pull back fastening sleeve, hold and remove tool.

Accessories can be hot after use. Don’t touch the tip of accessory by hand!

Please always use protective floves to remove accessory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWE10060 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWE10060

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info