POWEG8050 EN
Copyright © 2022 VARO P a g e | 4 www.varo.com
GARDEN MULTITOOL 4-IN-1 42.7CC
POWEG8050
1 INTENDED USE
This appliance is designed for the following applications:
▪ Brush cutter (when fitted with metal circular blade): The brush cutter is intended to cut
weed and climbing plants. Do not use it for other purposes, never use it for cutting wood.
Never cut objects with a diameter exceeding 13 mm.
▪ Grass trimmer (when fitted with nylon line cutting head): The grass trimmer is intended for
trimming grass. Do not use it for other purposes.
▪ Hedge trimmer (when fitted with reciprocating blade): The trimmer is intended to be used
for trimming hedges and bushes with diameter not more than 24 mm.
▪ Chain saw: this appliance is intended for trimming branches in trees.
Do not use this appliance for other purpose than those described in this manual. Not suitable
for professional use.
WARNING! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your tool should only be passed on
together with these instructions.
2 DESCRIPTION (FIG. A)
Engine unit
1. Safety lock-out
2. On/off switch
3. Carrying lug
4. 4x fixing bolts (with snap ring,
washer and nut)
5. Round handle (5a Rubber ring +5b
Pin)
6. Barrier bar
7. Cover
8. Screw grip
9. Safety lever
10. Shaft
11. Throttle control
12. Spark plug connector
13. Choke lever
14. Starter pull cord
15. Fuel tank
16. Filler cap
17. Fuel pump (primer)
18. Air filter housing cover
Hedge trimmer attachment
19. Handle
20. Lock / release
21. Transmission case
22. Cutter bar
23. Base plate (hedge shears)
24. Control lever
25. Front shaft (hedge trimmer)
26. Locking hole
27. Drive shaft
Chain saw attachment
28. Front shaft
29. Safety ring
30. Oil filler cap
31. Oil tank
32. Blade
33. saw chain
34. Grinder support
35. Stop
36. Locking hole
37. Drive shaft
38. Nut
39. Thread
40. Sprocket cover
41. Bar guide
42. Bar hole
43. Guide rail
44. Oil dispenser
45. Chain sprocket
46. Oil adjusting screw
47. Chain tensioner pin
48. Chain tensioner screw
Trimmer / brush cutter attachment
49. 4x bolts with snap ring, washer and
nut)
50. Blade guard
51. 3-section cutting blade
52. Trimmer with spool
53. Front shaft (trimmer/3-section cutting
blade)
54. Locking hole
