POWESET1 EN
Copyright © 2018 VARO P a g e | 8 www.varo.com
9 OPERATION
9.1 Charging the battery pack (Fig. 1)
a. Plug
b. Charging socket
c. Adapter
d. Power indicator
The battery pack has been shipped in a low charge condition to prevent possible problem. You
should charge them prior to use.
Note: Batteries will not reach full charge the first time they are charged. Allow several cycles
(drilling followed by recharging) for the item to fully charge. The battery should only be used
indoors.
The battery as supplied is not fully charged. Therefore, let the tool charge initially for 7 hours.
After the initial Charge, under normal usage, your tool should be fully charged in 3 to 5 hours.
The battery pack will become slightly warm to the touch while charging, this is normal and
does not indicate a problem.
Do not place the charger in an area of extreme heat or cold, it will best at normal room
temperature.
The battery pack will become slightly warm to the touch while charging, this
is normal and does not indicate a problem.
Do not place the charger in an area of extreme heat or cold, it will best at
normal room temperature.
NOTE: Allow the battery pack to cool completely before charging. Inspect
the battery pack before charging; do not charge a cracked or leaking
battery pack.
Charging indication:
The adapter (c) has one LED light. (See Fig. 1)
1. Plug the adapter (c) into suitable power outlet socket. The power indicator (d) will light
red once the connection has successfully completed.
2. Plug the charger plug (a) into the charging socket (b) of battery pack (5) and ensure to
connect firmly. The power indicator (d) will light red which means that the battery pack is
charging.
3. When the battery is loaded, the red light on the power indicator (d) will go out.
NOTE: If the battery does not fit properly, disconnect it and confirm that the
battery pack is the correct model for this charger as shown on the
specification chart. Do not charge any other battery pack or any battery
pack that does not securely fit the charger.
1. Frequently monitor the charger and battery pack while connected.
2. Unplug the charger and disconnect it from the battery pack when finished.
3. Allow the battery pack to cool completely before using it.
4. Store the charger and battery pack indoors, out of reach of children.
NOTE: If battery is hot after continuous use in the tool, allow it to cool down to room
temperature before charging. This will extend the life of your batteries.
