Bedienungsanleitung Powerplus POWX0396 (Seite 4 von 8) (Englisch)

645095

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POWX0396 EN

5.4 Power tool use and care

 Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

 Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken

switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any

other feature that might affect the operation of the power tool. If it is damaged, the power

tool must be repaired. Many accidents are caused by using poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to jam and are easier to control.

 Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Service

 Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 MACHINE-SPECIFIC SAFETY WARNINGS

 Hold tool by insulated grip surface when performing an operation where the cutting tool

may contact hidden wiring or its own cord. When in contact with a live wire, metallic parts

of the tool will also become live and may cause an electric shock to the operator.

 Do not start the tool with the blade touching any surface. The blade action will bounce the

tool and may cause body injury.

 Allow the tool to come to a complete stop before putting it down. A running tool will jerk

when the blade tip contacts any surface.

 Do not cut oversized work pieces

 Do not cut nails or screws unless you are using a blade specifically designed for this

purpose. Inspect your material before cutting

 Before switching on the tool, be sure the blade in not contacting the work piece.

 Keep hands away from moving parts and on the top surface of the work piece. Do not

place hands below work surface while saw is operating.

7 ASSEMBLY

Always check that the power supply corresponds to the voltage on the rating name plate.

To avoid accidental start, check to make sure lock-on button is not engaged prior to plugging

in tool and you finger is not touching the ON/OFF switch trigger (4).

7.1 Install or remove the saw blade (Fig 1)

 Unplug the power cord first.

 Rotate the Quick-release blade clamp (2) anticlockwise with hand.

 At the same time push blade (10) to the deepest position, then release the quick-release

blade clamp (2). Make sure it is securely fastened.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0396 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0396

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info