582663
7
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
POWX0560 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
7 ADJUSTMENTS
7.1 Plunge saw feature
7.1.1 Selector switch
Use the selector switch (17) to set the respective operation mode.
Change Saw Blade
Plunge Cut
Marked Cut
7.2 Guide rails and clamps (Fig. 1)
The guide rails allow precise and clean straight cuts, miter cuts and fitting. The rails also
protect the work piece surface from damages.
Fixing with the clamps ensures solid grip and safe work.
Place the guide rail on the work piece and fix the guide rail with the clamps. Slide the bar
into the groove of the guide rail and tighten the clamp with the lever.
Place the plunge saw on the guide rail. The base plate has a groove (13), which exactly
fits into the guide ridge of the rail.
8 OPERATION
8.1 Switching ON/OFF
Press the switch lock (2) and then the ON/OFF switch (1) to switch the plunge saw on.
Release the ON/OFF switch (1) to switch the plunge saw off.
Notes: Pressing the switch lock (2) unlocks the plunge cut mechanism at the same time, so
that the motor can be moved downwards. The saw blade emerges from the protective cover.
When lifting the saw the motor slides back into the initial position.
8.2 Setting the cutting depth
The cutting depth can be set between 0 - 54 mm:
Loosen the cutting depth limit stop knob (9) and slide it to the desired cutting depth
according to the graduated scale (11) to set the cutting depth.
Note: The graduated values on the scale (11) apply for straight cuts (90° cut).
The guide rail depth adjustment stopper (10) must be tilted up when using the plunge saw
without guide rail. Only when using the plunge saw with guide rail, the guide rail depth
adjustment stopper is used to compensate for the thickness of the guide rail.
Using the guide rail = guide rail depth adjustment stopper down.
Not using the guide rail = guide rail depth adjustment stopper up.
Tighten the cutting depth limit stop knob (9). The motor or respectively the saw blade can
now be pushed down to the set cutting depth.
For a clean, safe cut set the cutting depth in such way that only max. one saw blade tooth
protrudes under the work piece.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWX0560 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWX0560

Powerplus POWX0560 Bedienungsanleitung - Deutsch - 12 seiten

Powerplus POWX0560 Bedienungsanleitung - Holländisch - 11 seiten

Powerplus POWX0560 Bedienungsanleitung - Französisch - 12 seiten

Powerplus POWX0560 Zusatzinformation - Alle Sprachen - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info