Bedienungsanleitung Powerplus POWX0782 (Seite 8 von 23) (Englisch)

480927

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

POWX0782 EN

 Do not carry out any free-hand operations. Free-hand means that you use your hands for

supporting the workpiece, or for leading it with your hands, instead of using the rip fence

or the mitre block.

 NEVER bend over or around the saw blade. NEVER reach for a workpiece, before the

saw blade has come to a complete stop.

 Avoid a sudden or too quick infeed of a workpiece. Workpieces made of hard material

should be fed in as slowly as possible. Never fold or turn a workpiece while feeding it into

the saw. If the saw blade jams or ceases to turn while the workpiece is being fed in, turn

the equipment off immediately. Remove the plug from the socket. Remove the piece that

is blocking the saw.

 NEVER try to remove sawed off chips, and never touch the saw guard, as long as the saw

blade is turning.

 Remove all lose knots from the workpiece, BEFORE starting to saw.

 Do not maltreat the cable. Never pull on the cable, for removing the plug from the socket.

Do not expose the cable to heat, oil, water or sharp edges.

 Some types of dust that is generated while working with the saw may contain chemicals,

which can cause cancer, birth defects or other genetic damages. Some examples of these

substances are:

 Lead derived from paints containing lead;

 Arsenic and chrome from chemically treated wood.

 The hazard to your health from such exposures is dependent on how frequently you do

this kind of work.

 Measures for reducing your exposure to such chemicals: Always work in well-ventilated

surroundings and with certified safety equipment, such as dust masks that have been

specially designed for filtering out microscopic particles.

 For sawing operations, connect the equipment to a dust exhaust system.

 The guard may be lifted up while positioning a workpiece, or for easier access during

maintenance works. Make sure that the saw guard has been lowered and is positioned flat

against the sawing table, before connecting your tool to the mains supply.

7 ELECTRICAL SAFETY

Check the voltage that is documented on the type plate of the machine, to

make sure that it corresponds to the locally available mains voltage.Safety

class II.

8 SPECIAL PRODUCT CHARACTERISTICS

 Quick change-over between cross-cut and table saw mode.

 90° sawing range for bevelling (45° left or 45° right) with five preset stops

 110° sawing range for mitre sawing (50° left or 60° right) with ten preset stops

 Perfectly suited for mobile use, due to its low weight and small dimensions

 Robust, cast aluminium construction for precision sawing

 TCT saw blade

 Installation of additional guides possible

 After an interruption of the power supply, a restart protection prevents that the machine

starts up again when the power supply is restored.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0782 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0782

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info