Bedienungsanleitung Powerplus POWX0910 (Seite 5 von 11) (Englisch)

645079

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

POWX0910 EN

 If there are devices for connecting dust extraction and collection facilities, please ensure

that they are attached and used correctly. Using such devices can reduce dust-related

hazards.

5.4 Power tool use and care

 Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

 Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken

switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any

other feature that might affect the operation of the power tool. If it is damaged, the power

tool must be repaired. Many accidents are caused by using poorly maintained power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to jam and are easier to control.

 Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

5.5 Service

 Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 MACHINE-SPECIFIC SAFETY WARNINGS

 Hold tool by insulated gripping surfaces when performing an operation where the cutting

tool may contact hidden wiring or its own cord. Contact with a “live” should shock the

operator. If cutting into existing walls or other blind areas where electrical wiring may exist

is unavoidable, disconnect all fuses or circuit breakers feeding this worksite.

 Always make sure the work surface is free from nails and other foreign objects. Cutting

into a nail can cause the bit and the tool to jump and damage the bit.

 Never hold the workpiece in one hand and the tool in the other hand when in use. Never

place hands near or below cutting surface. Clamping the material and guiding the tool with

both hands is safer.

 Never lay workpiece on top of hard surfaces, like concrete, stone, ect… protruding cutting

bit may cause tool to jump.

 Always wear safety goggles and dust mask. Use only in well ventilated area. Using

personal safety devices and working in safe environment reduces risk of injury.

 After changing the bit or making any adjustments, make sure the collet nut and any other

adjustment devices are securely tightened. Loose adjustment device can unexpectedly

shift, causing loss of control; loss-rotating components will be violently thrown.

 Never start the tool when the bit is engaged in the material. The bit cutting edge may grab

the material causing loss of control of the cutter.

 Always hold the tool with two hands during start-up. The reaction torque of the motor can

cause the tool to twist.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX0910 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX0910

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info