POWX1190 EN
Copyright © 2020 VARO NV S t r a n a | 3 www.varo.com
HAMMER DRILL / DEMOLITION HAMMER 1600W
POWX1190
1 APPLICATION
Your hammer drill can be universally used for hammer drilling and chiseling in stone and
concrete.
It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Drill/chisel holder
2. Fastening sleeve
3. Fixation knob D-handle
4. D-handle
5. Auxiliary handle
6. Mode selector
7. Rear Handle
8. Power cable
9. Power switch
10. Attachment point for auxiliary handle
11. Anti Vibration System
12. Oil cover
13. Speed control dial
3 PACKAGE CONTENT LIST
▪ Remove all packing materials.
▪ Remove remaining packaging and transit supports (if existing).
▪ Check the completeness of the packing content.
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪ Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
- drill Ø18 x 320mm
- SDS point chisel: 320mm
- Grease cup
-2 x auxiliary handle
-Wrench
When parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
