Bedienungsanleitung Powerplus POWX1340 (Seite 6 von 12) (Englisch)

645723

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

POWX1340 EN

 Make sure that the workpiece is sufficiently supported or clamped. Keep your hands away

from the surface to be cut.

 Always wear safety goggles and hearing protection. If desired or required also use another

kind of protection like for example an apron or helmet.

 Ensure that mounted wheels and points are fitted in accordance with the manufacturer’s

instructions.

 Ensure that blotters are used when they are provided with the bonded abrasive product

and when they are required.

 If a guard is supplied with the tool never use the tool without such a guard.

 For tools intended to be fitted with threaded hole wheel, ensure that the thread in the

wheel is long enough to accept the spindle length.

 Ensure that ventilation openings are kept clear when working in dusty conditions. If it

should become nessesary to clear dust, first disconnect the tool from the mains supply

(use non metallic objects) and avoid damaging internal parts.

 Though poor conditions of the electrical mains, shortly voltage drops can appear when

starting the equipment. This can influence other equipment (eq. blinking of a lamp). If the

mains-impedance Zmax <0.348 Ohm, such disturbances are not expected. (In case of

need, you may contact your local supply authority for further information.

6.1 Additional safety instructions

Do not use the tool on light metal with a magnesium content exceeding

80%, as this type of metal is flammable.

The work head may continue rotating after the tool is turned off.

On the upper side of the tool there is a spindle-lock button. Do not press

the spindle-lock button while the tool is running.

 Make sure that the accessories used are suitable for the maximum speed stated in the

technical data.

 Make sure that the accessories are mounted according to the instructions.

 Only use accessories and adapters supplied by the manufacturer.

 Make sure that sparks cannot hit any persons or set flammable materials alight.

 Always wear safety goggles, hearing protection and if necessary other protective means,

such as working gloves, hard hat, etc.

7 ASSEMBLY

Before mounting an accessory, always unplug the tool.

7.1 Changing the attachment tools (Pic 1)

The small accessory attachments such as the grinding stones or cutting discs may be

attached directly to the multi tool.

If required , these tools may also be attach to the flexible drive shaft.

7.2 Attaching small tools directly to the multi tool. (Pic 2)

- Turn the collet chuck grip slightly while holding down the locking button

until the button engages.

Never press down on the locking button while the tool is running.

If the collet chuck grip can not be loosened by hand, use the small spanner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX1340 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX1340

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info