POWX147 EN
Copyright © 2021 VARO 1 www.varo.com
HOT GLUE GUN
POWX147
1 INTENDED USE
This glue gun is intended for gluing work pieces with a hot-melt adhesive. This tool is
especially suitable for spot-gluing or small-surface connections and glued seams. Not
suitable for professional use.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG. A)
1. Nozzle
2. Heating indicator
3. Charging port
4. Switch button
5. Charging and power indicator
6. Glue stick inlet
7. Soft grip
8. Trigger
9. Removable stand
10. USB cable
11. Charging plug
12. Glue stick
3 BEFORE FIRST USE
NOTE: This tool is pre-set to shipping mode (dormant state) which is to
avoid the battery from discharging due to unintended operation and to
avoid the risk of fire. For this reason the switch cannot be used to start the
tool.
Before first use, the hot glue gun must be awakened by connecting the adapter to the power
supply, the charging indicator (5) shows red, the tool can be used normally after unplug the
adapter.
It is recommended that reset the tool to shipping mode when transport or storage. Press
and hold the switch button (4) 5-8 s, release it after the red indicator (5) flashes 3 times and
make sure that the switch does not work.
3.1 How to recharge the glue gun
NOTE: During charging the battery will become warm as it is being charged.
The battery supplied with this tool contains a test charge only and must be
fully charged before use. First read the safety instructions then follow the
charging instructions.
▪ Connect the power supply to a suitable mains socket (important hints: check the voltage
on the model plate of the adapter).
▪ Plug the charging plug (11) into the charging port (3) on the top of this glue gun.
▪ Charge time is approx. 2-3 hours.
▪ When the battery is charging, the RED indicator (5) keeps illuminate.
▪ When fully charged, the indicator (5) will become green until unplug the adapter (10)
from the mains socket, the glue gun is ready to use.
▪ NOTE: Do not allow the cable to become knotted or kinked.
▪ Unplug the adapter when not in use and store it in a suitable storage cabinet.
