Bedienungsanleitung Powerplus POWX1770 (Seite 6 von 11) (Englisch)

480947

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

POWX1770 EN

 Only move the machine by lifting the handle. Never pull an attached air hose to move the

machine.

 The working parts of the machine can become hot during operation. Let the machine cool

down after use.

 The machine is equipped with a thermal safety system

 Never use gasoline or other flammable liquids to dean the too. Vapours in the tool can be

ignited by a spark and cause the tool to explode.

 If the tank leaks, switch off the machine immediately. Have the machine repaired by an

authorized technician.

 Make sure that the machine is switched off and unplugged and that the tank is pressure

free before troubleshooting or servicing, or when the machine is not used.

 After each use the tank must be vented and the moisture collected in the tank must be

bled. Not bleeding the tank can lead to leakage and may cause a dangerous situation.

 Keep this manual with your compressor.

6.1 Extension cords:

We don not recommend the use of an extension cord with this product as this may result in the

loss of power and overheating of the motor. An additional air hose should be used instead of

an extension cord. Improper use of extension cords may cause inefficient operation of tool,

which can result an overheating. Be sure your extension cord is rated to allow sufficient flow to

motor. Use of an extension cord heavy enough to carry the current the tool will draw is very

important. Especially when the power source is of great distance. An extension cord that is

insufficient will cause a drop in line voltage, resulting in not starting, power loss and causing

the motor to overheat.

7 OPERATING INSTRUCTIONS

7.1 Instructions before use.

After removing the compressor from its packaging and if you are certain that it is in perfect

condition, then you can carry out the following operations:

 Assemble the supplied wheels.

 Plastic caps at the side of the pumps, must be replaced by the supplied air filters

 You have to remove the oil cap and add oil before starting

7.2 Connecting and removing the air hose

The machine has been provided with quick couplings

for the attachment of 1 air hose.

 Press the connecting piece of the air hose into the

connection.

 Check whether the air hose is connected properly.

To remove an air hose, proceed as follows:

 Press the connecting piece of the air hose further

into the connection.

 Pull the collar on the connection backward.

 Pull out the connecting piece from the connection.

 Release the collar

Before connecting or removing an air hose, always pull the plug from the

power supply.

7.3 Setting the operating pressure

The set operating pressure can be read from the gauge.

 Turn the adjusting knob to the right to increase the operating pressure.

 Turn the adjusting knob to the left to reduce the operating pressure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX1770 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX1770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info