Bedienungsanleitung Powerplus POWX230 (Seite 5 von 9) (Englisch)

582377

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

POWX230 EN

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.4 Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

 Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR TILE CUTTERS

 Make sure that the cutting disc is correctly screened by the guard.

 Never remove the riving knife. The distance between the cutting disc and the riving knife

should not exceed 5 mm.

 Do not use cutting discs which are bent, deformed or otherwise damaged.

 Do not use cutting discs which do not comply with the specifications stated in this manual.

 Never start cutting tiles before the machine reaches full speed.

 Never attempt to cut extremely small workpieces.

 Do not leave the work area until the machine has been switched off and the cutting disc

has come to a complete standstill.

 Never attempt to stop the cutting disc by exerting pressure on the side of the disc.

 Always unplug the machine before performing any maintenance.

 Do not use the machine before it has been completely assembled and installed according

to the instructions.

 Do not perform any design, assembly or Construction activities on the table while the

machine is switched on.

 Unplug the machine and clean the table before leaving the work area.

6.1 Power supply

 This tile saw must be connected to an earthed 230V - 50Hz power source.

 This power source must be secured by a 16A fuse.

 Your machine is supplied with a 30mA residual current device to protect the user against

electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX230 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info