Bedienungsanleitung Powerplus POWX480 (Seite 4 von 9) (Englisch)

645356

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

POWX480 EN

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.4 Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the

working conditions and the work to be performed. Use of the power tool for operations

different from intended could lead to a hazardous situation.

5.5 Service

 Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 SPECIFIC SAFETY WARNINGS

Use this machine only for its purpose, as designated in this manual: bow welding with

electrodes.

Unproper use of this machine may cause harm to people, animals or property.

The user is responsible for his own safety as well as the safety of people in his surrounding.

 Repair should only be done by authorized/qualified personnel.

 Only the provided/included welding cables must be used (Ø10mm² section rubber cable)

 Maintenance must be done on a regular bases.

 While working, keep the welder free from all debris, do not put it against a wall, so

ventilation is guaranteed at all times.

 Pull socket from mains before moving the welder.

 Check condition of welding cables, electrode clamp, earth clamp regularly. Damaged

insulation can cause harm and can diminish quality of welding.

 Bow welding produces sparks, melted metal particles and smoke. So be very cautious

and remove all combustible fluids/materials from your working area.

 Make sure air supply is sufficient.

 Never weld bottles, barrels or tubes that contained inflammable liquids or gasses. Avoid

every contact with the welding current circuit: the no-load voltage that may occur between

the electrode clamp and the earth clamp may be dangerous.

 Never store or use the welder in a moist environment or in the rain.

 Protect your eyes with appropriate safety goggles (DIN degree 9-10) that you put in the

enclosed safety cap. Wear gloves and dry protective clothing, free of oil and grease, to

protect your skin from UV light.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWX480 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWX480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info