517143
1
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
POWXG1018 EN
Copyright © 2015 VARO P a g e | 1 www.varo.com
1 APPLIANCE ....................................................................................... 3
2 DESCRIPTION ................................................................................... 3
3 PACKAGE CONTENT LIST .............................................................. 4
4 SYMBOLS .......................................................................................... 4
5 SAFETY.............................................................................................. 4
6 KICKBACK SAFETY PRECAUTIONS .............................................. 6
7 SAFETY WARNINGS GASOLINE .................................................... 7
8 ASSEMBLY ........................................................................................ 7
8.1 Tools for assembly ................................................................................................... 7
8.2 Assembly requirements ............................................................................................ 7
8.3 Guide bar / saw chain / clutch cover installation .................................................... 7
8.3.1 To install saw chain: .................................................................................................... 8
8.3.2 Saw chain tension adjustment ..................................................................................... 8
8.3.3 To adjust saw chain: ................................................................................................... 8
8.3.4 Chain brake mechanical test ....................................................................................... 9
8.3.5 To test chain brake: ..................................................................................................... 9
9 FUEL AND LUBRICATION................................................................ 9
9.1 Fuel ............................................................................................................................ 9
9.2 Mixing fuel ............................................................................................................... 10
9.2.1 Fuel and lubrication symbols ..................................................................................... 10
9.2.2 Fuel mixing table ....................................................................................................... 10
9.2.3 Recommended fuels ................................................................................................. 10
9.2.4 Chain and bar lubrication .......................................................................................... 10
10 OPERATION .................................................................................... 10
10.1 Engine pre start checks .......................................................................................... 10
10.2 To start engine ........................................................................................................ 10
10.3 Re-starting a warm engine...................................................................................... 11
10.4 To stop engine ........................................................................................................ 11
10.5 Chain brake operational test .................................................................................. 11
10.6 Saw chain / bar lubrication ..................................................................................... 11
POWXG1018 EN
Copyright © 2015 VARO P a g e | 3 www.varo.com
CHAINSAW 49.3CC
POWXG1018
1 APPLIANCE
These models are intended for infrequent use by homeowners, cottagers, and campers, and
for such general applications as clearing, pruning, cutting firewood, etc. They are not intended
for prolonged use. If the intended use involves prolonged periods of operation, this may cause
circulatory problems in the user’s hands due to vibration. It is not designed for commercial use.
2 DESCRIPTION
1. Saw chain
2. Guide bar
3. Spark arrester screen
4. Chain brake lever / hand guard
5. Front handle
6. Starter handle
7. Stop switch
8. Safety trigger
9. Rear handle / boot loop
10. Oil tank cap
11. Fuel tank cap
12. Starter cover
13. Bucking spike
14. Bar retaining nuts
15. Muffler shield
16. Air cleaner cover
17. Choke lever
18. Saw chain adjustment screw
19. Chain catcher
20. Throttle/ trigger
LOW KICKBACK SAW CHAIN helps significantly reduce kickback, or the intensity of
kickback, due to specially designed depth gauges and guard links.
CHAIN BRAKE is a safety feature designed to reduce the possibility of injury due to kickback
by stopping a moving saw chain in milliseconds. It is activated by the Chain Brake lever.
SPARK ARRESTER SCREEN retains carbon and other flammable particles over 0.023
inches (0.6mm) in size from engine exhaust flow. Compliance with local, state and federal
laws and/or regulations governing the use of a spark arrester screen is the user’s
responsibility. See Safety Precautions for additional information.
STOP SWITCH immediately stops the engine when tripped. Stop switch must be pushed to
ON position to start or restart engine.
SAFETY TRIGGER prevents accidental acceleration of the engine. Throttle trigger cannot be
squeezed unless the safety latch is depressed.
CHAIN BRAKE LEVER / HAND GUARD protects the operator’s left hand in the event it slips
off the front handle while saw is running.
CHAIN CATCHER reduces the danger of injury in the event saw chain breaks or derails
during operation. The chain catcher is designed to intercept a whipping chain.
NOTE: Study your saw and be familiar with its parts.
WARNING Beware of kickback. Hold chain saw firmly with both hands when
using. For your own safety, please read and follow the safety precautions in
this manual before attempting to operate your chain saw. Improper use can
cause serious injury.
WARNING! When using gas tools, basic safety precautions, including the
following, should always be followed to reduce the risk of serious personal
injury and/or damage to the unit.
POWXG1018 EN
Copyright © 2015 VARO P a g e | 4 www.varo.com
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packing and package inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x Gasoline chainsaw 49.3cc 18”
1 x Manual
1 x Chain
1 x Bar
1 x Bar sheath
1 x Tool kit
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Read the user manual before
using the machine.
Wear gloves to protect your
hands
Mandatory use of eye
protection.
Wear safety boots to protect
agains electric shock
Wear noise protection
Make Sure the Chain Brake
is disengaged! Pull Hand
Guard/Chain Brake back to
run.
Warning! Danger
Read this manual carefully before using the machine, for your own safety.
Your power tool should only be passed on with these instructions.
Only use Bio degradable oil (environment-friendly) to lubricate the chain
5 SAFETY
DO NOT operate a chain saw with one hand! Serious injury to the operator, helpers,
bystanders, or any combination of these persons may result from onehanded operation. A
chain saw is intended for twohanded use.
DO NOT operate a chain saw when you are fatigued, under the influence of drugs, alcohol
or medication.
Use safety footwear, snug-fitting clothing, protective gloves, and eye, hearing and head
protection devices.
POWXG1018 EN
Copyright © 2015 VARO P a g e | 5 www.varo.com
Use caution when handling fuel. To avoide fire, move the chain saw at least 10 feet (3m)
from the fueling point before starting the engine.
DO NOT allow other persons to be near when starting or cutting with the chain saw. Keep
bystanders and animals out of the work area.
DO NOT start cutting until you have a clear work area, secure footing, and a planned
retreat path from the falling tree.
Keep all parts of your body away from the saw chain when the engine is running.
Before you start the engine, make sure that the saw chain is not contacting anything.
Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and
the muffler away from your body.
DO NOT operate a chain saw that is damaged, improperly adjusted, or not completely and
securely assembled. Be sure that the saw chain stops moving when the throttle control
trigger is released.
Shut off the engine before setting the chain saw down.
Use extreme caution when cutting small size brush and saplings because slender material
may catch the saw chain and be whipped toward you or pull you off balance.
When cutting a limb that is under tension, be alert for springback so that you will not be
struck when the tension in the wood fibers is released.
Keep the handles dry, clean, and free of oil or fuel mixture.
Operate the chain saw only in well-ventilated areas.
DO NOT operate a chain saw in a tree unless you have been specifically trained to do so.
All chain saw service, other than the items listed in the user manual safety and
maintenance instructions, should be performed by competent chain saw service
personnel.
When transporting your chain saw, use the appropriate guide bar scabbard.
DO NOT operate your chain saw near or around flammable liquids or gases whether in or
out of doors. An explosion and/or fire may result.
Do not fill fuel tank, oil tank or lubricate when the engine is running.
USE THE RIGHT TOOL: Cut wood only. Do not use the chain saw for purposes for which
it was not intended. For example, do not use the chain saw for cutting plastic, masonry, or
nonbuilding materials.
The first time user should have practical instruction in the use of chainsaw and the
protective equipment from an experienced operator.
Do not attempt to hold the saw with one hand only. You cannot control reactive forces
and you may lose control of the saw, which can result in the skating or bouncing of the bar
and chain along the limb or log.
Never run the chainsaw indoors. Your chainsaw produces poisonous exhaust as soon as
the combustible engine is started, which may be colorless and odorless. To use this
product can generate dust, mists and fumes containing chemicals known to cause
reproductive harm. Be aware of harmful dust, mist (such as saw dust or oil mist from chain
lubrication) and protect your self properly.
Wear gloves and keep your hand warm. Prolonged use of chainsaws exposing the
operator to vibrations may produce whitefinger disease. In order to reduce the risk of
whitefinger disease, please wear gloves and keep your hand warm. If any of the
whitefinger symptoms appear, seek medical advice immediately.
Drive in the spiked bumper of the chainsaw directly behind the intended hinge and pivot
the saw around this point. The spiked bumper rolls against the trunk.
Only chain, guide bar and spark plug can be replaced by the user himself. Always make
sure you replace with correct material as stated in the specifications of the manual.
POWXG1018 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
6 KICKBACK SAFETY PRECAUTIONS
KICKBACK may occur when the NOSE or TIP of the guide bar touches an object, or when
wood closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast reverse reaction, kicking the guide bar
up and back toward the operator.
PINCHING the saw chain along the BOTTOM of the guide bar may PULL the saw forward
away from the operator.
PINCHING the saw chain along the TOP of the guide bar may PUSH the guide bar rapidly
back toward the operator.
Any of these reactions may cause you to lose control of the saw, which could result in serious
personal injury.
With a basic understanding of kickback, you can reduce or eliminate the element of
surprise. Sudden surprise contributes to accidents.
Keep a good firm grip on the saw with both hands, the right hand on the rear handle, and
the left hand on the front handle, when the engine is running. Use a firm grip with thumbs
and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and
maintain control of the saw. Don’t let go.
Make sure that the area in which you are cutting is free from obstructions. Do not let the
nose of the guide bar contact a log, branch, or any other obstruction which could be hit
while you are operating the saw.
Cut at high engine speeds.
Do not overreach or cut above shoulder height.
Follow manufacturer’s sharpening and maintenance instructions for the saw chain.
Only use replacement bars and chains specified by the manufacturer or the equivalent.
NOTE: Low-kickback saw chain is chain that has met the kickback
performance.
WARNING: Kickback can lead to dangerous loss of control of the chain saw
and result in serious or fatal injury to the saw operator or to anyone
standing close by. Always be alert. Rotational kickback and pinch-kickback
are major chain saw operational dangers and the leading cause of most
accidents.
Beware of:
Rotational kickback (fig 2a)
A = kickback path
B = kickback reaction zone
The push (pinch kickback) and pull reactions a = pull (fig2b)
B = solid objects
C = push
POWXG1018 EN
Copyright © 2015 VARO P a g e | 10 www.varo.com
9.2 Mixing fuel
Add oil to an approved fuel container followed by the gasoline to allow incoming gasoline to
mix with oil. Shake container to ensure thorough mix.
Warning: Lack of lubrication voids engine warranty. Gasoline and oil must
be mixed at 25:1
9.2.1 Fuel and lubrication symbols
9.2.2 Fuel mixing table
Gasoline liters
2
3
4
5
2-cycle oil ml
80
120
160
200
9.2.3 Recommended fuels
Some conventional gasolines are being blended with oxygenates such as alcohol or an ether
compound to meet clean air standards. The engine is designed to operate satisfactorily on any
gasoline intended for automotive use including oxygenated gasolines.
9.2.4 Chain and bar lubrication
Always refill the chain oil tank each time the fuel tank is refilled. We recommend using our
replacement chain & bar. Always use good quality sprocket oil, which contains additives to
reduce friction and wear and to assist in the prevention of pitch formation on the bar and chain
10 OPERATION
10.1 Engine pre start checks
WARNING: Never start or operate the saw unless the bar and chain are
properly installed.
Fill the fuel tank (A) with correct fuel mixture.
Fill the oil tank (B) with correct chain and bar oil.
Be certain the chain brake (C) is disengaged before starting unit.
10.2 To start engine
To start the saw, push the switch (ON/OFF switch) to the ON (I) position. (Fig. 9a)
Pull out the choke (A) to the point where it latches in place. (Fig. 9b)
Depress starter switch and (C) safety trigger (D) release trigger and then the latch. (Fig.
9c)
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Powerplus POWXG1018 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Powerplus POWXG1018

Powerplus POWXG1018 Bedienungsanleitung - Deutsch - 28 seiten

Powerplus POWXG1018 Bedienungsanleitung - Holländisch - 28 seiten

Powerplus POWXG1018 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info