Bedienungsanleitung Powerplus POWXG2009 (Seite 5 von 8) (Englisch)

582045

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

POWXG2009 EN

 Hold the power tool by insulated gripping surfaces only, because the cutter blade may

contact hidden wiring or its own cord. Cutter blades contacting a “live” wire may make

exposed metal parts of the power tool “live” and could give the operator an electric shock.

 Wear hearing protection.

 Recommend to use a residual current device with a tripping current of 30 mA or less.

 When cutting, make sure do not touch objects such as wire fences or plants frame-holder.

Doing so can damage the blade beam.

 Hold the electric hedge trimmer with both hands firmly, with one hand on the rear and with

the other hand on the front handle. Thumb and fingers must firmly embraced.

7 OPERATION

7.1 Starting the machine

 Switching on: press both the trigger switch (1) and the front handle trigger (3) at the same

time.

 Switching off: release one of the switches.

 The mechanical blade brake makes the blades stop immediately within 0.5 sec. the small

flash in the area of the upper ventilation slots is normal and does no harm to you or the

machine.

7.2 Rotated rear handle

 The rear handle of this machine can be rotated to 5 positions: +90°, +45°, 0°, -45° and -

90°for better ergonomics in vertical cutting position.

7.3 Cutting hedge

Before you start your work, select branches with a diameter not bigger than 24mm and cut

them with a pruning shear. A trapezoidal cut corresponds to the natural, growth of plants and

results in optimal hedge growing.

 First cut the sides from the bottom to the top. Cut the upper part giving it the shape you

prefer, in a straight horizontal form, roof-like or rounded.

 The safety blade has laterally rounded and staggered cutting teeth to reduce danger of

injury. The additional shock protection avoids inconvenient kickback when the blades

come into contact with walls, fences etc.

 If the blades are jammed or blocked by obstacles, switch the motor off immediately, pull

the plug, and then remove the object jamming the blades.

 Caution! Metal obstacles like fences etc. may damaged the cutting blades.

 Always make sure to keep the extension cord behind your back and to start cutting the

hedge at the point nearest to the supply socked. Therefore plan your working direction

before staring.

8 CLEANING AND MAINTENANCE

Warning! Before performing any work on the equipment, pull the power

plug.

 Check your machine regularly before starting the work.

 Damaged cutting blades have to be repaired or exchanged by a qualified service man

before working with the machine

 After each cutting operation, clean the cutting blade with a soft brush and cloth with

lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.

 Always keep the ventilation slots in motor housing clean

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG2009 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG2009

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info