Bedienungsanleitung Powerplus POWXG3025 (Seite 5 von 20) (Englisch)

582100

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

POWXG3025 EN

5 GENERAL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings

and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

5.1 Work area

 Keep work area clean and well lit. Cluttered and dark areas invite accidents.

 Do not operate tools in explosive atmospheres, such as in the presence of flammable

liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.

 Keep children and bystanders away while operating a tool. Distractions can cause you to

lose control.

5.2 Personal safety

 Stay alert, watch what you are doing and use common sense when operating a tool. Do

not use a tool while you are tired or under the influence of drugs, alcohol or medication. A

moment of inattention while operating tools may result in serious personal injury.

 Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used whenever conditions require

will reduce personal injuries.

 Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying tools with your finger on the switch or plugging in tools that have the switch on

invites accidents.

 Remove any adjusting key or wrench before turning the tool on. A wrench or a key left

attached to a rotating part of the tool may result in personal injury.

 Do not overreach. Keep proper footing and balance at all times. This enables better

control of the tool in unexpected situations.

 Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewelry or long hair can be caught in moving

parts.

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related

hazards.

5.3 Engine tool use and care

 Use the correct tool for your application. The correct tool will do the job better and safer at

the rate for which it was designed.

 Store idle tools out of the reach of children and do not allow persons unfamiliar with the

tool or these instructions to operate the tool. The tools are dangerous in the hands of

untrained users.

 Maintain tools. Check for misalignment or sticking of moving parts, breakage of parts and

any other condition that may affect the tool’s operation. If damaged, have the tool repaired

before use. Many accidents are caused by poorly maintained tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the tool, accessories and tool bits etc., in accordance with these instructions and in

the manner intended for the particular type of tool, taking into account the working

conditions and the work to be performed. Use of the tool for operations different from

intended could lead to a hazardous situation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG3025 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG3025

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info