POWXG30405 EN
Copyright © 2023 VARO P a g e | 9 www.varo.com
▪ put the cartridge back in the spool, place the knob back onto the body and
turn it anti-clockwise.
▪ mount the trimmer spool back on the machine (see 7.5.3)
If the line is too long when you use the equipment for the first time, the
surplus end of it will be cut by the blade on the guard hood.
8 OPERATION
Connect the power plug to the coupling of an appropriate extension cord.
Form a loop, push it through the opening in the rear handle and hook over
the cable holder (Fig. G1).
8.1 Starting the machine (Fig. H)
▪ To start the appliance push the lock off switch (a) forward and then squeeze the trigger
switch (b).
8.2 Stopping the machine (Fig. H)
▪ To switch the appliance off, release the trigger switch.
8.3 Working using the thread spool
▪ In small grass areas hold the device at an angle of about 30° and swing the cutting head
evenly to the right and left with a semi-circular movement.
▪ The best results are obtained with a maximum grass length of 15 cm. If the grass is taller,
it is recommended to mow several times.
▪ To cut around trees, fence posts or other obstacles, slowly move the device around the
obstacle and cut with the thread ends.
▪ Avoid any contact with fixed obstacles (rocks, walls, picket fences, etc.). The thread would
wear out quickly. Use the edge of the protective cover to keep the device at the correct
distance.
▪
Attention! Do not lay the cutting head on the ground during operation!
8.4 Working with the 4-tooth blade
Always wear the harness and suitable protection clothing when working
with the device. Wear eye, hearing and head protection. Ensure that the
blade is installed correctly. Replace damaged or blunt tool parts. There is a
risk of injury.
▪ Only use the blade to work on open, even areas. Carefully inspect the area to be cut and
remove all foreign bodies. Avoid hitting stones, metal or other obstacles. The blade can be
damaged and there is a risk of kickback by the machine.
▪ When working, hold the cutter above the ground and slowly swivel the device back and
forth like a scythe in an equal arch.
▪ Do not hold the cutting head at an angle.
▪ Do not use the device to cut wild growth or brushwood.
▪ Regularly check the blades for damage and replace as needed.
