Bedienungsanleitung Powerplus POWXG6460 (Seite 8 von 17) (Englisch)

582106

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

POWXG6460 EN

 If the machine becomes clogged, shut of the power source and disconnect the spark plug

wire from the spark plug (electric unit disconnect from supply) before clearing debris. Keep

the power source clear of debris and other accumulations to prevent damage to the power

source or possible fire. Remember that operating the starting mechanism on engine

powered machines will still cause the cutting means to move

 Keep all guards and deflectors in place and in good working condition

 Do not tamper with the power source governor settings; the governor controls the safe

maximum operating speed and protects the power source and all moving parts from

damage caused by over speed. Seek authorized service if a problem exists.

 Do not transport this machine while the power source is running

 Shut off the power source and disconnect the spark plug lead (electric unit disconnect

from supply) whenever you leave the work area

 Do not tilt the machine while the power source is running

6.3 Maintenance and storage

 When the machine is stopped for servicing, inspection, or storage, or to change an

accessory, shut off the power source, disconnect the spark plug wire from the spark plug

(electric unit disconnect from supply), make sure that all moving parts have come to a

complete stop and, where a key is fitted remove. Allow the machine to cool before making

any inspections, adjustments, etc

 Store the machine where fuel vapor will not reach an open flame or spark. For extended

storage periods, run the unit dry of fuel. Allow the machine to cool before storing.

 When servicing the cutting means be aware that, even though the power source will not

start due to the interlock feature of the guard, the cutting means can still be moved by a

manual starting mechanism.

7 ASSEMBLY INSTRUCTIONS

Warning! You may need assistance when lifting the machine out of the box

and assembling.

Open the package and remove the machine from package. (Fig 2)

Pull out the collect box and take out the main part of the machine and all accessories.

 Take all parts out of the package. Be sure four protruding supports in the bottom of the

motor unit pass through four notches in the upper face of the base frame. (Fig. 3)

 Slide the collection box out of the base frame. (Fig. 4)

 Fit the front wheel sets to the base frame with the aid of two screws. (Fig. 5)

 Use the spanner to mount wheels to the base frame using two wheel shafts, two

grommets, two spring grommets and two screws. Assemble cap by pushing in on by hand.

(Fig. 6)

 Slide the collection box back to the base frame. Ensure that the collection box runs above

the guide rails. (Fig. 7)

 Stand and put hands in position as shown in Fig. 8. Lay the motor unit on the base frame

by placing four protruding supports (Fig. 8/Item B) of the motor unit on the slots (Fig. 8-

1/Item A) of the base frame.

 Fix the location plate to the base frame with two screws. (Fig. 9)

 Lock the collection box with safety switch in position by pushing upwards. (Fig. 10-1)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXG6460 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXG6460

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info