Bedienungsanleitung Powerplus POWXQ5232 (Seite 6 von 12) (Englisch)

582128

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

POWXQ5232 EN

 Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators

and other polymer components may be damaged resulting in electrolyte leakage and/or

internal short circuiting leading to heat generation causing rupture or file. Moreover do not

dispose of the batteries in fire, explosion and/or intense burning may result.

 Under extreme conditions, battery leakage may occur. When you notice liquid on the

battery, proceed as follows:

 Carefully wipe the liquid off using a cloth. Avoid skin contact.

 In case of skin or eye contact, follow the instructions below:

o Immediately rinse with water. Neutralize with a mild acid such

as lemon juice or vinegar.

o In case of eye contact, rinse abundantly with clean water for at

least 10 minutes. Consult a physician.

Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do

not incinerate the battery.

6.2 Chargers (9)

 Use the charger provided with the tool only to charge the battery

 Never attempt to charge non-rechargeable batteries.

 Have defective cords replaced immediately.

 Do not expose to water.

 Do not open the charger.

 Do not probe the charger.

 The charger is intended for indoor use only.

7 FEATURES

7.1 Li-ion battery (10)

Advantages of Li-ion batteries :

 Li-ion batteries have a higher capacity/weight ratio (more power for less heavy, more

compact, battery)

 No memory effect (capacity loss after several charge/discharge cycles) like other type

batteries. (Ni-Cd, Ni-MeH ..).

 Limited self discharge. (also see chapter : Storage)

7.2 Keyless chuck (1)

A keyless chuck is included on your drill to allow for easy installation and removal of

bits/accessories. The chuck is divided into two parts. The rear is called the collar and the front

is called the body.

To open and close the keyless chuck, grasp and hold the collar of the chuck with one hand

and rotate the chuck body with your other hand. The arrows on the chuck indicate in which

direction to rotate the chuck body in order to GRIP (tighten) or release (unlock) the drill bit.

WARNING: Do not hold the chuck body with one hand and use power of the

drill to tighten or loosen the juck jaws. The chuck body could slip and your

hand could come in contact with a rotating accessory. This could cause an

accident resulting in personal injury.

7.3 Torque adjustment ring (2)

The drill has a torque adjustment ring. It allows you to select the desired torque depending on

the task you have to perform (drill / different types of screws into different materials). The

proper setting depends on the type of material and the size of screw you are using.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXQ5232 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXQ5232

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info