Bedienungsanleitung Powerplus POWXQ5330 (Seite 6 von 14) (Englisch)

481027

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

POWXQ5330 EN

 Only use saw blades that are recommended by the manufacturer and that fulfil the EN847-1

standard.

 Always use the accessories that are recommended by this manual.

 Select the correct saw blade for the material must be sawn.

 To reduce the generation of noise, always make sure that the blade is sharp and clean.

 Only use correctly sharpened saw blades. Never exceed the maximum speed that is

indicated on the saw blade.

 Before installing the saw blade, clean the axle, the flanges (especially the assembly

surfaces) and the hexagonal nut. Incorrect mounting can lead to vibrations/knocking or

slipping of the saw blade.

 Prevent that the saw comes into contact with metals, such as nails and screws. Search for

and remove all nails, screws and other foreign materials from the workpiece, before you

start to work.

 Remove spanners, cut off pieces and the other items from the saw table, before turning on

the switch.

 NEVER wear gloves while working; the wearing of gloves is only recommended while

cutting tools are being replaced.

 Make sure that your hands stay clear of the cutting line of the saw blade.

 NEVER stand in the cutting line of the saw blade and NEVER let anyone else stand in that

position.

 Let the saw run for a few moments before inserting a workpiece. Listen for vibrations or

knocking of the saw blade, which can indicate improper mounting or balancing of the blade.

 The equipment may not be used for making grooves or recesses.

 Replace the table insert when it is worn out.

 NEVER make any adjustments on the machine while it is turning. Remove the plug from the

socket before making any adjustments.

 If necessary, use a push block. A push block MUST be used for longitudinal sawing of

smaller workpieces, so that your hands and fingers are kept well away from the saw blade.

 Always store your push block, whenever it is not in use.

 Pay special attention to the instructions that help to reduce the hazard of KICK BACK. KICK

BACK is a sudden reaction to a jammed, bent or badly aligned saw blade. KICK BACK

causes the workpiece to be thrown back in the direction of the operator. KICK BACK can

lead to serious injuries. KICK BACK can be avoided by keeping your saw blade sharp, by

keeping the rip fence parallel to the saw blade, by maintaining the riving knife and the saw

guard in good condition and in the right position, by keeping a good grip on the workpiece

until you have pushed it completely past the saw blade, and by not sawing any twisted or

skewed wood pieces, or pieces that do not have a straight edge for moving along the rip

fence, in a longitudinal direction.

 Do not carry out any free-hand operations. Free-hand means that you use your hands for

supporting the workpiece, or for leading it with your hands, instead of using the rip fence or

the mitre block.

 NEVER bend over or around the saw blade. NEVER reach for a workpiece, before the saw

blade has come to a complete stop.

 Avoid a sudden or too quick infeed of a workpiece. Workpieces made of hard material

should be fed in as slowly as possible. Never fold or turn a workpiece while feeding it into

the saw. If the saw blade jams or ceases to turn while the workpiece is being fed in, turn the

equipment off immediately. Remove the plug from the socket. Remove the piece that is

blocking the saw.

 NEVER try to remove sawed off chips, and never touch the saw guard, as long as the saw

blade is turning.

 Remove all lose knots from the workpiece, BEFORE starting to saw.

 Do not maltreat the cable. Never pull on the cable, for removing the plug from the socket.

Do not expose the cable to heat, oil, water or sharp edges.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXQ5330 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXQ5330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info