Bedienungsanleitung Powerplus POWXQ5350 (Seite 7 von 22) (Englisch)

481029

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

POWXQ5350 EN

6 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS

Warning! The laser beam potentially causes eye damage. Do not look or

stare into the laser beam.

 During use, do not point the laser beam at people, directly or indirectly through reflecting

surfaces.

 This laser complies with class 2 according to the relevant standard. The unit includes no

servicing components. Do not open the housing for any reason. If the unit is damaged,

have the damage repaired by an authorized repair agent.

 Laser viewing glasses are not protective glasses against laser radiation.

7 ADDITIONAL SAFETY INSTRUCTIONS FOR CROSS-CUT AND

TABLE SAWS

 Always wear eye protectors.

 Never use the equipment in the presence of flammable liquids or gases.

 NEVER use the equipment when a cutting disc (and not a saw disc) has been attached.

 Before each use, check the saw blade for small cracks or damages. Replace a cracked or

damaged blade immediately.

 Never use saw blades made of high-speed steel (HSS).

 Only use saw blades that are recommended by the manufacturer and that fulfil the EN847-

1 standard. Also make sure the riving knife is not thicker than the width of the saw cut, and

that it is not thinner than the body of the saw blade.

 Always use the accessories that are recommended by this manual.

 Select the correct saw blade for the material must be sawn.

 To reduce the generation of noise, always make sure that the blade is sharp and clean.

 Only use correctly sharpened saw blades. Never exceed the maximum speed that is

indicated on the saw blade.

 Before installing the saw blade, clean the axle, the flanges (especially the assembly

surfaces) and the hexagonal nut. Incorrect mounting can lead to vibrations/knocking or

slipping of the saw blade.

 Wherever possible, use the saw guard and the riving knife with every type of application,

also when sawing material in two. Always mount the saw guard according to the

instructions in this manual. Cutting operations are those where the saw blade cuts

completely through the workpiece, such as for instance when doing longitudinal cuts or

shortening workpieces. NEVER use the equipment with a defective saw guard, and never

tie up the saw guard with a rope or cord. Every irregularity in the operation of the saw

guard must be immediately corrected.

 Immediately replace the saw guard and the riving knife, after a process has been

completed that required their removal.

 Prevent that the saw comes into contact with metals, such as nails and screws. Search for

and remove all nails, screws and other foreign materials from the workpiece, before you

start to work.

 Remove spanners, cut off pieces and the other items from the saw table, before turning on

the switch.

 NEVER wear gloves while working; the wearing of gloves is only recommended while

cutting tools are being replaced.

 Make sure that your hands stay clear of the cutting line of the saw blade.

 NEVER stand in the cutting line of the saw blade and NEVER let anyone else stand in that

position.

 Make sure that the saw blade does not touch the riving knife or the workpiece, before you

turn on the switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Powerplus POWXQ5350 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Powerplus POWXQ5350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info