Bedienungsanleitung PowerTech PTRV-3 (Seite 35 von 44) (Englisch)

685357

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

UNDER VEHICLE INSTALLATION

PTRV-3 and PTRV-3 RR Model Generators which are designed to be installed

under a vehicles floorboard require specific mounting considerations. These units are

specifically engineered to be suspended from the underside of a vehicle. The anti-

vibration mounting hardware supplied is capable of supporting the units’ suspended

weight. An additional safety bolt is incorporated into each mounting bracket as a back-up

safety measure. The unit must be carefully positioned so not to interfere with any of the

vehicles components or systems. The vehicles frame and/or floor structure must be

capable of supporting the suspended weight. Additional support material must be added if

necessary. Use ½” Grade 8 mounting Bolts and Lock Nuts to secure the unit through the

frame or floorboards.

IMPORTANT: When mounting a unit through the floorboards it is Highly

Recommended

to add a backing plate of sufficient size and material to the inside of the

floorboards to distribute the weight and strengthen the area against flexing. Small

diameter flat washers are not adequate for this application and must not be used.

SPLASH GUARD

PTRV-3 and PTRV-3 RR Model Generators which are mounted in an under

vehicle installation maybe subjected to adverse road conditions such as water, mud,

debris, etc. To protect the unit against damage from these elements it is advisable to

install Splash Guards to prevent these elements from entering or clogging the air intake or

outlets of the enclosure. When a Remote Radiator is used in the installation, protecting

the fan and radiator core is essential. (See the following section on Remote Radiator

Installation for more Information).

REMOTE RADIATOR

PTRV-3 RR Model Generators are designed and manufactured to be installed

using a remotely mounted radiator unit to maintain normal engine operating temperature.

The remote radiator is housed inside a shroud which protects the radiator core and

facilitates mounting to the vehicle. A 12V DC electric fan mounted to the shroud insures

a positive air flow through the radiator.

The remote radiator unit must be mounted to a section of the vehicles undercarriage

that is free of obstructions. Cool ambient air must flow freely to the fan. Avoid heat generating

components such as engine, transmission, exhaust muffler, etc. Heat shields should be installed if

necessary. If heat shields and or splash guards are installed be sure the air flow into and out of

the unit is unobstructed. It is also important to prevent the recirculation of the heated discharged

air. Hoses and electrical wiring must be safely and securely routed to avoid any vehicle moving

components such as drive shaft, axle housing and springs. Only use automotive clamps and

locking fasteners for installation.

A remote mounted reservoir tank is provided to fill and maintain the cooling system at

the proper coolant level. The reservoir tank must be located above the height of the generator and

remote radiator unit.

IMPORTANT: To prevent overheating be sure all air bubbles are removed from the cooling

system prior to extended service. Check and maintain the coolant level at recommended

intervals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PowerTech PTRV-3 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info