604323
52
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
Owner’s Manual: Advanced Programming and Troubleshooting 50
Changing Treadmill Settings
Through a specific set of number key presses, you can
customize the pause or cool down times and adjust the
maximum limit for the running belt speed.
To access the menu and change the settings, perform the
following steps:
1. At the banner, press the following keys in sequence
without pausing between selections:
PAUSE/RESET, 5, 6, 7, 1
Numbers appear on the display as you press the
associated key.
DIAGS - SET PARAMETERS scrolls across the display
followed by SAFETY CODE.
Selecting Safety Code Protection
When the treadmill is shipped from the factory, the safety
code protection feature is disabled. If you enable the safety
code, the display prompts you to enter the safety code at the
beginning of your exercise session. The running belt will not
move unless the proper 4-digit safety code is entered.
If the correct code: 1, 2, 3, 4, is not entered within 30
seconds, further access is denied. Refer to Entering the
Safety Code.
2. At the SAFETY CODE prompt, press OK. Use a
navigational arrow key to alternate between the two
selections.
CAUTION: Do not assume the treadmill is safe
because of safety code protection. Never leave
children unsupervised around the treadmill.
3. When you are ready, press OK to accept the display
setting and move to the next program. Or, press PAUSE/
RESET to return to the banner.
Setting Description
ENABLED Causes the safety code prompt to appear
prior to a workout and when returning
from pause mode.
DISABLED Does not require a safety code to operate.
M9.33-931_Owners Manual.book Page 50 Friday, January 11, 2008 7:42 AM
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Precor 9.31 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info