Treadmill 200 Series Assembly Guide 2
Getting Started
Thank you for choosing Precor. For proper installation, please read this guide
thoroughly and follow the assembly instructions. If you do not assemble the
treadmill according to these guidelines, you can void the Precor Limited Warranty.
Obtaining Service
Do not service the treadmill except for minor belt adjustments and maintenance
tasks as described in the owner’s manual. For more information regarding
customer support numbers or a list of Precor authorized service dealers, visit the
Precor web site at www.precor.com.
Installation Requirements
CAUTION: You will need assistance to assemble this unit. DO NOT attempt assembly
by yourself.
Follow these installation requirements when assembling the unit:
Assemble the unit near the location where you plan to use it and provide
ample space around the unit.
Important: Consult your owner’s manual for proper placement of your equipment.
Make sure that the power switch is OFF and that the treadmill is not plugged
into a power source. Check the ON/OFF power switch on the front of the
treadmill. Place the switch in the O (OFF) position.
Assemble the treadmill on a solid, flat surface. A smooth, flat surface under
the treadmill helps keep it level and a level treadmill will have fewer
malfunctions.
Open the box and assemble the components in the sequence presented in this
guide. If you plan to move the unit, obtain help and use proper lifting
techniques.
Important: Grasp the rear end of the treadmill frame or either side of the base
frame. Lift the treadmill and roll it on its front wheels. Do not grasp any other plastic
part while lifting or moving the unit. The plastic parts are not reinforced and they
may break.
Obtain assistance. Ask another capable adult for assistance during the
assembly process.
Use your fingers or the appropriate tools to insert fasteners. Proper alignment
helps prevent crossthreading. Do not fully wrench tighten fasteners until
instructed to do so.
