Product Owner's Manual: Club Features 29
Viewing the Error Log
Quick access to the informational display is available if error
messages appear on the display and have been recorded in the
error log. This feature is usually reserved for service personnel.
To view the error log:
1. At the Precor banner, press and hold PAUSE/RESET for 4
seconds.
2. If DIAGS - INFORMATION DISPLAY or ERROR LOG
appears, then press OK.
If any errors are logged, they appear on the display. If no errors
are logged, a message such as STOP KEY or STUCK KEY
appears instead.
3. Release the PAUSE/RESET key to return to the Precor banner.
Note: On treadmills, the red STOP button can be used instead of
the PAUSE/RESET key.
Erasing the Error Log
When you no longer need the error log information, you can erase
the entries.
To erase the error log entries:
1. Press QUICKSTART while any error description is scrolling
across the display.
2. Continue to maintain light pressure on the key until the message
HOLD TO CLEAR ERRORS scrolls off the display.
3. When you release Quickstart, the message NO ERRORS will
appear in the display if the error log has been deleted.
Important: You cannot retrieve the error log once you have
deleted it. You may want to resolve any issues you are
experiencing with the equipment before erasing the error log.
4. Press RESET to return to the Precor banner.
