IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
OPERATION
Place the EH1164 on a firm flat surface.
Plug the mains lead into a 13 Amp mains socket.
If connecting via an extension lead, make sure that the lead
is rated at 13 Amps or more, and that it is fully unwound.
Switch the appliance on at the mains socket.
Use the rotary power control switches on the top to select the
required operation:
O = OFF
Fan symbol = cool air only
1 = Low Heat (1kW)
2 = High heat (2 kW)
Unplug the appliance from the mains when not in use.
USING THE THERMOSTAT
The thermostat can be use to regulate the room temperature.
Turn the rotary switch to the high heat position, and rotate
the temperature control fully clockwise.
The appliance will then operate at maximum output. When
the desired temperature is reached, rotate the temperature
control anticlockwise until a click is heard. The appliance will
then switch on and off to keep the room at the desired
temperature.
Either the low or high heat setting can be used.
Page 2
