PAT TESTING
When used in a workplace, this product must be safety-
tested yearly by a qualified electrician (PAT Tested) in order
to comply with the Electricity at Work Regulations.
We recommend that it is PAT tested regularly when used in a
domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified
electrician at least once every 10 years or at every change of
occupancy.
For office and retail premises, and buildings such as village
halls, the wiring must be inspected at least once every 5
years.
It is recommended that all buildings be fitted with smoke
alarms (it is mandatory for new buildings).
OPERATION
Plug the mains lead into a 13 Amp mains socket.
If connecting via an extension lead, make sure that the lead
is rated at 10 Amps or more, and that it is fully unwound.
Switch the unit on at the mains socket.
Press the button on the remote control to operate the
heater.
Press the ADJUSTOR button once, twice or three times to
select cool air, low heat or high heat.
Using the + and − buttons, select the desired room
temperature. The selected temperature is displayed in the 2-
Page 4
