Bedienungsanleitung President Harrison (Seite 27 von 47) (Deutsch, Englisch, Französisch, Spanisch)

636596

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Welcome to the world of the new generation of CB

radios. The new PRESIDENT range gives you access to

top performance CB equipment. With the use of up-to-

date technology, which guarantees unprecedented

quality, your PRESIDENT HARRISON ASC is a new step in

personal communications and is the surest choice for

the most demanding of professional CB radio users. To

ensure that you make the most of all its capacities, we

advise you to read carefully this manual before installing

and using your PRESIDENT HARRISON ASC.

A) INSTALLATION:

1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO:

a)You should choose the most appropriate setting from a simple and practical

point of view.

b) Your CB radio should not interfere with the driver or the passengers.

c) Remember to provide for the passing and protection of different wires (e.g.

power, antenna, accessory cabling) so that they do not in any way interfere

with the driving of the vehicle.

d) To install your equipment, use the cradle (1) and the self-tapping screws [2]

provided (drilling diameter 3.2

mm). Take care not to damage

the vehicle’s electrical system

while drilling the dash board.

e) Do not forget to insert the rubber

joints [3] between the CB and its

support as these have a shock-

absorbing effect which permits

gentle orientation and

tightening of the set.

f) Choose where to place the

microphone support and

remember that the microphone

cord must stretch to the driver

without interfering with the

controls of the vehicle.

- N.B.: As the transceiver has a frontal microphone socket, it can be set into the

dash board. In this case, you will need to add an external loud speaker to

improve the sound quality of communications (connector EXT.SP situated on

the back panel: D). Ask your dealer for advice on mounting your CB radio.

2) ANTENNA INSTALLATION:

a) Choosing your antenna:

- For CB radios, the longer the antenna, the better its results. Your dealer will

be able to help you with your choice of antenna.

b) Mobile antenna:

- Must be fixed to the vehicle where there is a maximum of metallic surface

(ground plane), away from windscreen mountings.

- If you already have a radio-telephone antenna installed, the CB antenna

should be higher than this.

- There are two types of antenna: pre-regulated which should be used on a

good ground plane (e.g. car roof or lid of the boot), and

. adjustable which offer a much larger range and can be used on a smaller

ground plane (see p 27 § 5, Adjustment of SWR).

- For an antenna which must be fixed by drilling, you will need a good contact

between the antenna and the ground plane. To obtain this, you should lightly

scratch the surface where the screw and tightening star are to be placed.

- Be careful not to pinch or flatten the coaxial cable (as this runs the risk of break

down and/or short circuiting).

- Connect the antenna (B).

OUTPUT RADIUS PATTERNS

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

President Harrison Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info