Bedienungsanleitung President Johnny III (Seite 33 von 56) (Englisch, Französisch, Spanisch, Polnisch)

636613

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

for an optimum transmission quality. Adjustable level from 1 (high level) to 9 (low

level) by rotating the channel knob.

corresponds to the Sensitivity Level.

- Anti-Vox

: allows disabling the transmission generated by the surrounding noise.

The level is adjustable from 0 (Off) to 9 (low level) by rotating the channel knob.

corresponds to Anti-vox Level.

- Delay time

: allows avoiding the sudden cut of the transmission by adding a delay

at the end of speaking. The level is adjustable from 1 (short delay) to 9 (long delay)

by rotating the channel selector. corresponds to Delay Time.

Once the adjustments are done, press during 1 second the VOX key in order to quit

the Vox Adjustment mode.

8) HI-CUT

Eliminates high frequency interferences. Has to be used in accordance with the

reception conditions. A short press activates the HI-Cut ﬁlter and «HIC» appears on

the display. A new press disables the function and «HIC» disappears.

ANL FILTER (Automatic Noise Limiter)

The transceiver is equipped with an automatic ﬁlter which reduces back ground

noises and some reception interferences in AM.

9) ROGER ~ SCAN

ROGER

(short press)

The icon «

» appears on the display when the function is active. The Roger Beep

sounds when the PTT switch of the microphone is released in order to let your corre-

spondent speak. Historically as CB is a «simplex» communication mode, it is not possible

to speak and to listen at the same time (as it is the case with a telephone). Once

someone had ﬁnished talking, he said “Roger” in order to prevent his correspondent

that it was his turn to talk. The word “Roger” has been replaced by a signiﬁcant beep.

There comes “Roger beep” from.

Note: the Roger beep also sounds in the loudspeaker if the KEY BP function is active.

If the KEY BP function is not active, only the correspondent can hear the Roger Beep.

SCAN (long press)

Channel research: Allows activating the SCAN function (research of the channels) in

an increasing way. «SCN» is displayed. The scanning stops as soon as there is a busy

channel. The scanning automatically starts 3 seconds after the end of the transmission

and no key is activated during 3 s. The scanning starts again in an increasing way

by turning the rotary knob to the right, or in a decreasing way by turning the rotary

knob to the left.

A new long press on SCAN disables the SCAN function.

10) STORE ~ MEM

STORE

(long press)

Allows to memorize an emergency channel with following parameters: HI-CUT.

To memorize: Select the channel to be memorized.

- press 1 second the MEM key; «MEM» appears in the display. If the KEY BP function is

activated a long beep conﬁrms the saving.

To delete a memory:

- switch off the transceiver.

- keep the MEM key pressed and switch on the transceiver.

- the memory is deleted.

MEM (short press)

To recall a memory:

- press MEM shortly, «MEM» appears on the display. If the KEY BP function is activated

a beep sounds. The memorized channel is activated. Short press again MEM to go

back to previous operating channel.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

President Johnny III Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info