Bedienungsanleitung President MC 8000 DSC (Seite 17 von 48) (Englisch)

636661

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Using FIPS codes for weather alerts

The US National Weather Service established 6-digit Federal Information Processing Sys-

tem(FIPS)codestoissueweatheralertsinspecicareas.Youcanchoosewhichareasyou

want to hear alerts for by entering these FIPS codes in your radio. This can prevent you from

being bothered by events that are far from where you are boating. The radio only sounds the

alert tone if an incoming FIPS code matches one of the areas you selected.

• FormoreinformationabouthowtheNWSusesFIPScodes,seetheNWSwebsite:www.

nws.noaa.gov/nwr/nwspschg.htm.

• ToseeanindexofFIPScodesbystate,seethewebsiteoftheNationalInstituteofStand-

ardsandTechnology(NIST):www.itl.nist.gov/pspubs/co-codes/states.htm.

• ForinformationontheCanadianimplementationofFIPScodes,calledCanadianLocation

Codes, see the website of the Meteorological Service of Canada (MSC): http://www.msc.

ec.gc.ca/msb/weatheradio/transmitter/index_e.cfm

NOTE: If you travel outside the areas you have entered into your radio, you may

not hear alerts that affect your new location. Be sure to enter the FIPS codes of

all the areas you plan to travel to during this trip.

Follow the steps below to edit the list of FIPS codes. You can store up to 30 different FIPS

codes in your radio.

000000

Use the up and down arrows

to adjust each of the six

digits in turn.

FIPS Code

Back[CLR]

Forward[ENT]

FIPS Codes

Setup

Press and hold -

[New]

 1. DisplaythenormalmenuandchoosetheSetupsub-menu.

2. Select FIPS Codes. The screen displays any previously-entered FIPS codes.

3. To add a new FIPS code, select New.

4. Use CHANNEL UP and CHANNEL DOWNtochangetherstofthesixdigits;CHAN-

NEL UP increases the number and CHANNEL DOWN decreases it.

 5. Whentherstdigitiscorrect,pressENT-1W/25W.Thecursormovestothenextdigit.

EntertheremainingvedigitsoftheFIPScodeinthesameway.Ifyoumakeamistake

while entering a digit, press CLR-SCAN to erase the wrong number and moved the cur-

sor to the left digit.

 6. Whenthesixthdigitiscorrect,pressENT-1W/25W. The radio displays the new FIPS

codeandasksyoutoconrm.Tosavethiscode,selectYes; to cancel this code, select

No. The radio returns to the list of FIPS codes.

 7. TochangeanexistingFIPScode,selectthecodeyouwanttochange.

8. To delete the FIPS code, select Delete. To edit the code, select Edit, then use CHAN-

NEL UP and CHANNEL DOWNbuttonstochangeeachofthesixdigits.

 9. WhenyouaresatisedwiththelistofFIPScodes,selectExit to close the menu screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

President MC 8000 DSC Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von President MC 8000 DSC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info