Bedienungsanleitung President MC 8000 DSC (Seite 28 von 48) (Englisch)

636661

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

2. Select DSC Call sub-menu, then select POS Request.

3. The radio displays the names listed in your directory; use CHANNEL UP and CHAN-

NEL DOWN to choose the directory entry you want to contact and press ENT-1W/25W.

If you want to contact a station that is not in your directory, select Manual. The radio

prompts you to enter the MMSI number you want to call. Enter the MMSI number the

same way you enter directory entries (see page 21). Enter all nine digits and press

ENT-1W/25W.

 4. TheradiodisplaystheMMSInumberyouareabouttocontactandasksyoutoconrm.

If you want to request the position of the displayed MMSI number, select Send. To can-

cel the request, select Cancel.

5. When the other station responds, the radio displays the MMSI number, the longitude,

and the latitude of the other station. If your radio is connected to a chartplotter through

the NMEA OUT connection (see page 34), the position information will also be dis-

played on the plotter screen.

6. If the other station does not have valid GPS data, the radio displays No Position.

Receiving a position request (Position Reply)

When another station requests your current position, the radio displays the following screen:

Cancel

POS Request

JOHN HENRY

To send your current position to the other station, select Reply; the radio transmits your lati-

tude and longitude to the other station. If you select Reply but the radio does not have valid

GPS data, it transmits the reply code with No Position.

To reject the position request, select Cancel.

Enabling automatic position reply

If you want the radio to automatically transmit your current position whenever it receives a

position request, you can enable automatic position reply. Most boaters activate automatic

position reply for safety reasons or because they subscribe to a marine towing service.

Sometimes-forexample,insomecompetitivesituations--youmaynotwantotherstationsto

getyourpositionwithoutyourmanualconrmation

1. Press and hold CALL-MENU to display the normal menu.

2. Select Setup and then POS Reply.

3. Choose Auto and press ENT-1W/25W. The radio will automatically transmit your posi-

tion when it receives a position request.

4. To disable automatic position reply, repeat the steps above and select Manual.

Sending your own position (Position Send)

If your radio is connected to a GPS receiver, you can send your boat’s position to someone

else. If you are requesting assistance or using an all ships call to give a safety warning, you

can send your current position so other stations know where you are:

1. Press CALL-MENU to display the call menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

President MC 8000 DSC Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von President MC 8000 DSC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info