Bedienungsanleitung Prestigio RoadRunner 320 (Seite 6 von 8) (Englisch)

594128

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

User Manual RoadRunner 320

3. Settings

Before recording, you can set up the device according to your requirements.

- In video/picture preview mode, press [MENU] to enter video/picture

settings, press it again to go to general settings, press it third time to exit.

- In setting list, use

[ ]/[ ]

to navigate the menu, press

[OK] to confirm the

selection, and

[MENU] to exit

Video settings

•Resolution: Select the resolution of recorded video: 1080FHD / 1920x1080, 1080P/1440X1080,

720P / 1280x720, WVGA/848X480, VGA / 640x480.

•Loop recording: Set the video duration (1, 3, 5 minutes or off) for loop recording. When the

microSD card is full, the device will delete the oldest unlocked video file automatically.

•Exposure: Set exposure value to determine how much light the camera’s sensor receives. For

lowlight situations, use a higher exposure.

•Motion detection: Turn on or off motion detection. If there is any motion detected while the car

engine is stopped, your car DVR will start recording automatically.

•Record audio: Set to turn the microphone on or off.

•Date stamp: Add date and logo stamp onto videos.

Picture settings

•Capture mode: Select the capture mode from At once/ In 2 sec/In 5 sec/In 10 sec.

•Resolution: Select the picture image size from 12M / 4000x3000, 8M / 3264x2448, 5M /

2592x1944, 3M / 2048x1536, 1.3M / 1280x960, VGA / 640x480.

•Burst: Select to turn the burst on or off. In burst mode, several photos are captured in quick

succession. This is used mainly when the subject is in successive motion, such as sports.

•Quality: Select quality from Fine / Normal / Economy.

•Sharpness: Adjust the sharpness.

•White balance: Select an appropriate white balance, so images have a true-to-life color range. It

is for specific lighting situations.

•Color: Select color from normal / black & white / sepia.

•ISO: This controls camera light sensitivity. It is measured in filmcamera equivalents. Low values

are for stationary or brightly-lit objects. Higher values are for fast-moving or poorly-lit objects.

•Exposure: Set exposure value to determine how much light the camera’s sensor receives. For

lowlight situations, use a higher exposure.

•Anti-shaking: Minimize blurring and compensate for camera shake.

•Quick review: Set photo review time (2s, 5s) after shooting in preview mode.

•Date stamp: Add date and logo stamp onto videos.

General settings

In preview mode, double press [MENU] twice to enter general settings.

•Date/Time: Set date and time on device.

•Auto power off: Set automatic power off when the device is not in use.

•Beep sound: Turn on or off beep sound.

•Language: Choose your language.

•Frequency: For a given luminance, the frequency of light fluctuation that evokes a sensation of

flicker. Set a right flickering frequency to avoid horizontal stripe interference.

•LCD off: Set automatic LCD off when the device is not in use, press any button to wake up.

•Format: Format the memory card.

Formatting will erase all your stored data. Back up your data before proceeding.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Prestigio RoadRunner 320 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info