Bedienungsanleitung Prestigio Roadrunner 570GPS - PCDVRR 570 (Seite 7 von 11) (Englisch)

589333

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

User Manual RoadRunner 570 / RoadRunner 570GPS

3. Settings

Before recording, you can set up the device according to your requirements.

- In preview mode, press [ ] to enter settings, press it again to exit. Use [ ]/

[ ] to navigate the menu.

Settings menu

•Resolution: Select the resolution of recorded video: 2304x1296 (30 fps), 1920x1080 (30 fps),

1280x720 (60 fps).

•Video quality: Set the video quality to super fine, fine, or normal.

•Record overwrite: Set the video duration ( 1, 3, 5, or 10 minutes) for loop recording. When the

microSD card is full, the device will delete the oldest unlocked video file automatically.

•Motion detection: Turn on or off motion detection. If there is any motion detected while the car

engine is stopped, your car DVR will start recording automatically.

•Power on record: Set DVR to start recording when power on.

•Power off delay: Select a time span for DVR to power off when the car engine stops.

•Power on delay: Select a time span for DVR to power on when the car engine starts.

•MIC: Set to turn the microphone on or off.

•Time lapse: Set the time interval to record the same scene or the same object automatically for

a long time, but show it quickly, so that a slow action appears to happen quickly.

•Language: Choose your language.

•Car number set: Set the car plate number if necessary.

•TV type: Choose your TV type from NTSC, and PAL.

•Auto power off: Set automatic power off when the device is not in use.

•Format: Format the memory card.

Formatting will erase all your stored data. Back up your data before proceeding.

•Time setup: Set time on DVR.

•Stamp: Add information stamp onto videos/photos.

•Auto LCD off: Set automatic LCD off when the device is not in use, press any button to wake up.

•Default setting: Restore to default setting.

•Beep sound: Adjust volume of beep sound.

•Flicker: For a given luminance, the frequency of light fluctuation that evokes a sensation of

flicker. Set a right flickering frequency to avoid horizontal stripe interference.

•Contrast: Adjust the contrast.

•Sharpness: Adjust the sharpness.

•White balance: Select an appropriate white balance, so images have a true-to-life color range. It

is for specific lighting situations.

•EV setting: Set exposure value to determine how much light the camera’s sensor receives. For

lowlight situations, use a higher exposure.

•G-sensor set: Select the sensitivity of the G-sensor. The smaller the number is, the higher the

sensitivity is. When reaching the sensitive value (such as collision), the recording file will be

automatically protected.

•GPS auto update time: Set the GPS to update the date/time automatically.

•GMT setup: Select the local GMT (Greenwich Mean Time).

•GPS set up: Turn on or off GPS.

•WDR: Turn on or off WDR (Wide Dynamic Range). WDR can enhance the brightness in dark, and

adjust the brightness in backlighting.

•LDWS detect: Turn on or off LDWS (Lane Departure Warning System).

•LDWS calibration: Adjust the LDWS.

•Active slot setup: Set the file storage position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Prestigio Roadrunner 570GPS - PCDVRR 570 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Prestigio Roadrunner 570GPS - PCDVRR 570

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info