Bedienungsanleitung Pride Alumalite (Seite 19 von 34) (Englisch)

722010

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

How can I get maximum range or distance per charge?

Rarely do you have an ideal driving situation such as smooth, flat, hard terrain with no wind, hills, or

curves. More often you are presented with hills, pavement cracks, uneven and loosely packed surfaces,

curves, and wind. All of these factors will affect the distance or running time per battery charge. Below are

a few suggestions for obtaining the maximum range per charge:

■

Always charge the battery fully prior to your trip.

■

Plan your trip in advance to avoid inclines if possible.

■

Limit baggage weight to essential items.

■

Try to maintain an even speed and avoid stop-and-go driving.

What type of battery should I use?

We recommend a Pride-supplied Lithium-Ion battery that is sealed and maintenance-free. Refer to the

specifications table for more information regarding the battery used with your scooter.

WARNING! Corrosive chemicals contained in batteries. Use only Lithium-Ion batteries to reduce the

risk of leakage or explosive conditions.

Why does my new battery seem weak?

Like nickel-cadmium batteries, Lithium-Ion batteries have a “memory” effect. Lithium-Ion batteries are

specifically designed to provide power, drain down their charge, and then accept a relatively quick

recharge. If the batteries are continually recharged after only being partially discharged, they lose their

ability to hold a full charge.

We work closely with our battery manufacturer to provide a battery that best suits your scooter’s specific

demands. Fresh batteries arrive regularly at Pride and are promptly shipped with a full charge. During

shipping, the battery encounters temperature extremes that may influence initial performance. Heat robs

the charge from the battery, and cold slows the power available and extends the time needed to recharge

the battery (just as with a car battery).

It might take a few days for the temperature of the battery to stabilize and adjust to its new ambient

temperature. More importantly, it will take a few “charging cycles” (a full drain—then a full recharge) to

establish the critical chemical balance that is essential to the battery’s peak performance and long life. It

will be well worth it to take the time to break in your battery properly.

How can I ensure maximum battery life?

A fully charged battery will provide reliable performance and extended battery life. Keep your scooter’s

battery fully charged whenever possible. Batteries that are infrequently charged, repeatedly charged after

only a partial discharge, or stored without a full charge may be permanently damaged, causing unreliable

scooter operation and limited battery life.

NOTE: The useful life of a battery is quite often a reflection of the care it receives.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pride Alumalite Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info