Bedienungsanleitung Pride Go Go Endurance (Seite 37 von 124) (Englisch, Französisch, Spanisch)

793185

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Travel Scooter Series 37

CLEANING AND DISINFECTION

Precautions must be taken when cleaning equipment/devices to lower the risk of spreading infection. This is to

limit the spread of illness and other potentially infection material (OPIM) (blood components).

Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your scooter. Avoid

using products that may scratch the surface of your scooter.

If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for use on

your product before application.

For hard/soft surfaces, remove visible contamination if present.

● For plastic and metal use Lysol®/Clorox® disinfecting spray/wipes

and other qualiﬁ ed SARS-CoV-2 disinfecting products.

● For other vinyl surfaces, clean with vinyl safe disinfecting wipes or

solutions.

▪ Suggested Disinfectants

▪ Birex® SE Disinfectant, Bleach-Rite® Disinfecting

Spray, Citrace® Germicide

▪ Dispatch® Spray Hospital Cleaner Disinfectant with

Bleach

▪ Diluted Bleach Solution (10% dilution or less);

Note: Bleach with pH factor between 7 and 9 is

suitable; a product with a pH of 10.5 or higher may

damage the vinyl surface integrity over an extended

period of time.

▪ Disinfecting Wipes

▪ Clorox, Green Works, PDI Sani-Cloth HB Wipes

Lysol, Oxivir, Virox, and CaviWipes.

● For Tire cleaning, clean with oﬀ the shelf tire/wheel cleaners

HOW TO CLEAN/DISINFECT EQUIPMENT:

HARD/SOFT SURFACES (Plastic shrouds, metal framing, seat fabric,

tires, armrests and footplate mats, as applicable)

WARNING! Follow all safety instructions for the proper use of the disinfectant and/or cleaning

agent before applying it to your product. Failure to comply may result in skin irritation or

premature deterioration of upholstery and/or Travel Scooter ﬁ nishes.

WARNING! Never hose off your Travel Scooter or place it in direct contact with water. Your Travel

Scooter has a painted, ABS plastic body shroud that allows it to be easily wiped clean with a damp

cloth.

WARNING! Never use any chemicals to clean a vinyl seat, as they may cause the seat to become

slippery or dry out and crack. Use soapy water and dry the seat thoroughly.

ELECTRONICS (Joystick controller, enhanced displays, touch screens, remote controls, keyboards, cell

phones and tablets, as applicable)

For electronics, remove visible contamination if present.

● Turn oﬀ device and disconnect batteries.

● Never spray any liquids directly into the product(s).

● Moisten a microﬁ ber cloth with a mixture of 70% isopropyl alcohol/30% water solution. The cloth should

be damp, but not dripping or excessively wet. Dry surfaces thoroughly to avoid pooling of liquids and

prior to boxing.

V I I I . C A R E A N D M A I N T E N A N C E

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pride Go Go Endurance Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pride Go Go Endurance

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info