Bedienungsanleitung Pride Jazzy Air (Seite 16 von 32) (Englisch)

793187

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

16 www.pridemobility.com Jazzy Air

V. COMFORT ADJUSTMENTS

COMFORT ADJUSTMENTS

After becoming familiar with your power chair’s operation, you may nd the need to make some adjustments to

increase your comfort, such as armrest angle, foot platform height and angle, and controller position. Refer to the

following information before making comfort adjustments.

NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be

replaced with a new nylon insert lock nut. Nylon insert lock nuts should not be reused as it may cause damage

to the nylon insert, resulting in a less secure t. Replacement nylon insert lock nuts are available at local

hardware stores or through your authorized Pride Provider.

NOTE: If your power chair is equipped with an optional seating system, please refer to the information provided

in separate manuals.

WARNING! The center of gravity of your power chair was factory set to a position that meets

the needs of the demographic majority of users. Your authorized Pride Provider has evaluated

your power chair and made any necessary adjustments to suit your specic requirements. Do

not change your seating conguration without rst contacting Pride Mobility Products or your

authorized Pride Provider.

WARNING! Some power chair components are heavy. You may need assistance to lift or carry

them. Please refer to the specications table for specic component weights before you

disassemble the power chair.

WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may

lose control of the seat if they do so.

WARNING! Remove the occupant from the power chair before making any adjustments.

Figure 11. Armrest and Seatback Adjustments

Manual Recline Seatback Adjustment

If your power chair is equipped with a manual recline

seatback, you can adjust the seatback angle using the

seatback release lever. Seegure11.

To adjust the recline angle using the seatback

release lever:

1. Pull up on the seatback release lever.

2. Lean forward or backward to the desired position.

3. Release the lever.

Armrest Angle Adjustment

To change the armrest angle:

1. Lift the armrest straight up so that it is perpendicular

to the oor. Seegure11.

2. Loosen the jam nut, if equipped.

3. Turn the adjusting screw to raise or lower the

front of the armrest.

4. Tighten the jam nut, if equipped, to lock the

adjusting screw into place.

Armrest Height Adjustment

To change the armrest height:

1. Loosen the setscrews on the armrest. See

gure11.

2. Raise or lower the armrest to the desired height.

3. Tighten the setscrews to secure the armrest.

JAM NUT

ARMREST ANGLE

ADJUSTMENT

SCREW

ARMREST HEIGHT

ADJUSTING

SETSCREW

SEATBACK

RELEASE LEVER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pride Jazzy Air Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pride Jazzy Air

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info