Bedienungsanleitung Pride Luxor (Seite 33 von 40) (Englisch)

668243

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Luxor www.pridemobility.com 33

VII. CARE AND MAINTENANCE

Storage

Your power chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the batteries

from the power chair. See VI. “Batteries and Charging.”

WARNING! If you fail to store the unit properly, the frame can rust and the electronics can be damaged.

Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures, or stored without

a full charge may be permanently damaged, causing unreliable performance and limited service life. It is recommended that

you charge the batteries periodically throughout periods of prolonged storage to ensure proper performance.

You may wish to place several boards under the frame of your power chair to raise it off of the ground during periods of

prolonged storage. This takes the weight off the tyres and reduces the possibility of flat spots developing on the areas of the

tyres contacting the ground.

Disposal of Your Power Chair

Your power chair must be disposed of according to applicable local and national statutory regulations. Contact your local

waste disposal agency or authorized Pride Provider for information on proper disposal of power chair packaging, metal

frame components, plastic components, electronics, and batteries.

Cleaning and Disinfection

 Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your power chair. Avoid using

products that may scratch the surface of your power chair.

 If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for use on your

product before application.

WARNING! Follow all safety instructions for the proper use of the disinfectant and/or cleaning

agent before applying it to your product. Failure to comply may result in skin irritation or premature

deterioration of upholstery and/or power chair finishes.

WARNING! Never hose off your power chair or place it in direct contact with water. Your power

chair has a painted, ABS plastic body shroud that allows it to be easily wiped clean with a damp

cloth.

WARNING! Never use any chemicals to clean a vinyl seat, as they may cause the seat to become

slippery or dry out and crack. Use soapy water and dry the seat thoroughly.

Wheel Replacement

If your chair is equipped with a solid tyre insert, then you must replace the entire wheel assembly. Replacement wheel

assemblies are readily available through your authorized Pride Provider.

WARNING! The wheels on your power chair should only be serviced or replaced by an authorized

Pride Provider or a qualified technician.

WARNING! Be sure that the power to the controller is turned off and the power chair is not in

freewheel mode before performing this procedure.

WARNING! When changing a tyre, remove only the center lug nut and washer, then remove the

wheel. If any further disassembly is required, deflate the tyre completely or it may explode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pride Luxor Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info