Bedienungsanleitung Pride Wrangler (Seite 34 von 108) (Englisch, Französisch, Spanisch)

722013

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

34 MV600

CONSOLE, CHARGER AND REAR ELECTRONICS

 Keep these areas free of moisture.

 Allow these areas to dry thoroughly if they have been exposed to moisture before operating your vehicle

again.

VIII. CARE AND MAINTENANCE

NYLON LOCK NUT REPLACEMENT

Any nylon insert lock nut removed during the periodic maintenance, assembly or disassembly of the vehicle must

be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,

resulting in a less secure ﬁ t. Replacement nylon insert lock nuts are available at local hardware stores or through

your authorized dealer.

STORING YOUR VEHICLE

If you plan on not using your vehicle for an extended period of time, it is best to:

 Fully charge its batteries prior to storage.

 Disconnect the batteries from the vehicle.

 Store your vehicle in a warm, dry environment.

 Avoid storing your vehicle where it will be exposed to temperature extremes.

 Recommended storage temperature: -40ºF/-40ºC to 149ºF/65ºC.

WARNING! Always protect batteries from freezing temperatures and never charge a frozen

battery. Charging a frozen battery can result in damage to the battery.

Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures or stored

without a full charge may be permanently damaged, causing unreliable performance and limited service life. It is

recommended that you charge the vehicle batteries periodically throughout periods of prolonged storage to ensure

proper performance.

You may wish to place several boards under the frame of your vehicle to raise it oﬀ of the ground during periods

of prolonged storage. This takes the weight oﬀ the tires and reduces the possibility of ﬂ at spots developing on the

areas of the tires contacting the ground.

DISPOSAL OF YOUR VEHICLE

Your vehicle must be disposed of according to applicable local and national statutory regulations. Contact your local

waste disposal agency or authorized

dealer

for information on proper disposal of packaging, metal frame components,

plastic components, electronics, batteries, neoprene, silicone and polyurethane materials.

WARNING! Plastic bags are a suffocation hazard. Dispose of plastic bags properly and do not

allow children to play with them.

FUSE REPLACEMENT

In the event a fuse should cease to work:

1. Remove the fuse by pulling it out of its slot.

2. Examine the fuse to be sure it is blown. See

ﬁ gure 27.

3. Insert a new fuse of the same rating.

WARNING! The replacement fuse

must exactly match the rating of

the fuse being replaced. Failure to

use properly rated fuses may cause

damage to the electrical system.

Figure 27. Fuse Replacement

Working Fuse Blown Fuse (Replace)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pride Wrangler Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info